HobbyKing.com New Products Flash Sale
Thread Tools
Old Dec 05, 2014, 08:34 PM
Registered User
Joined Aug 2014
17 Posts
Lightbridge video signal lost on takeoff!!!

I have recently just built my first multirotor Tarot 680pro with Naza V2, E600 motors , Zenmuse H3-3D gimbal and a lightbridge controller. On my first test run I had to use the mini usb for my video connection as I am waiting for a micro HDMI extension to arrive. At idle before takeoff the video feed works perfectly as all the display data. At around 1/4 to 1/2 throttle still have video signal. At full throttle and take off point the picture goes blank. All the data is showing and reading OK but just not the picture? Battery is a 6S 9000mAh. Any ideas on what is going wrong?? I am thinking my battery wire to the PCB is too thin? Any suggestions would be greatly appreciated.
Euro clad is offline Find More Posts by Euro clad
Reply With Quote
Sign up now
to remove ads between posts

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Help! Phantom 2 with Lightbridge and Futaba 14SG Failsafe when signal lost nategreat Multirotor Talk 1 Aug 03, 2014 11:10 PM
Help! Phantom 2 does backflip on takeoff - see video qbizzy DJI-Innovations 1 Jun 23, 2014 12:43 AM
Help! Phantom 2 does backflip on takeoff - see video qbizzy Multirotor Electronics 3 Jun 09, 2014 04:35 PM
Help! Phantom 2 backflips on takeoff - see video qbizzy Multirotor Talk 2 Jun 06, 2014 03:32 PM
Discussion Video reciever randomly lost signal SageHillsPilott FPV Equipment 0 Nov 30, 2013 12:35 AM