|Feb 05, 2002, 01:22 AM|
Lite Stick CG
I Lost my Lite Stock instructions(Buried under lots of Plane and foam parts) and need the CG location.
|Feb 05, 2002, 07:22 AM|
I've got the instructions in .pdf format but can't remember where I got them now
anyway, the cg is 60mm back friom the wing leading edge - here's a lift from the instructions:
Balance Point (C.G.)
1. It is CRITICAL that the Lite Stik be balanced properly!
Please read this section carfully.
2. Slide the wings dowels into the wing mounts. The
dowels should fit quite tightly the first time you install
them. You may also have to move the mounts slightly to
perfectly align them with the wing dowels.
3. If you have not already done so, install the pro-peller,
the spinner, and the battery pack. There is NO
need to connect the battery or turn on the radio system.
4. On the bottom of the wing, make a mark 60 mm
back from the wing’s leading edge.
5. Pick up the plane with your finger tips on the
mark. The plane should rest level. If the tail dips, move
the wing back on the fuselage stick. If the nose dips,
move the wing forward on the fuselage stick. Do this
until the plane rests level.
6. Once the correct balance has been found, attach
the receiver mount with a small dab of glue.
hope that helps, email me if you want me to send the full .pdf file
|Feb 05, 2002, 11:26 PM|
I saw a link to someones website for rigging with string to strengthen the wing up, does anyone know the link, if not , I'm sure it can't be to hard to figure out were to place the string.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|sky scooter or lite stick||DeaninMilwaukee||Beginner Training Area (Aircraft-Electric)||9||Jul 05, 2001 02:00 PM|
|CG on Pico/Lite Stick???||deadcell||Parkflyers||1||May 20, 2001 04:32 AM|
|Lite Stick its growing on me.||Sparkie||Electric Plane Talk||18||May 01, 2001 03:37 AM|
|What's better Regular Litestick of Full Fuse Lite Stick?||mrebman||Parkflyers||1||Apr 27, 2001 01:23 AM|
|2 channel lite stick?||e-flyer||Parkflyers||3||Apr 21, 2001 12:05 AM|