|Nov 20, 2008, 09:32 AM|
Joined Apr 2008
Apprentice 15e wattage measurements
I have recently purchased from e-bay an apprentice 15e with a "defective esc and motor" but never assembled or flown.
It appears that it was never flown and never assembled. I installed a new Turnigy Sentry 40A speed control as the motor had tested Ok. What I would like to know is what others may have found for readings of amps, volts, watts while running at 1/2; 3/4; and WOT using the stock prop and fully charged battery.
If my unit can give similar readings then I will make an assumptiom that the motor is not defective.
I have run the unit for approx 10 min. and there was no indication of any problems.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Article||E-flite's Apprentice 15e RTF with Spektrum DX5e 2.4 GHz Radio Review||78dave||Beginner Training Area (Aircraft-Electric)||586||Nov 28, 2014 12:55 PM|
|New Product||Apprentice 15e RTF w/Dx5e Radio by E-flite||Get Real||Parkflyers||2656||Nov 28, 2014 11:01 AM|
|Apprentice 15e RTF w/Dx5e Radio||Andrewiski||Electric Plane Talk||7||Jun 27, 2008 05:00 PM|