SMALL - Telemetry SMALL - Radio
Thread Tools
Old Apr 25, 2015, 03:08 PM
titanium681 is offline
Find More Posts by titanium681
Registered User
United States, NV, Las Vegas
Joined Feb 2015
20 Posts
Discussion
re: Blitzworks LX MiG 29 surface configurations

Hi all,

Just wonder if anyone else who owns this aircraft has had any problems configuring the surface movements. My ailerons and elevator mirror each other, and I can't seem to get them to move independently. Haven't been able to get the thrust vectoring to work at all.
The user's manual is useless, so if anyone can shed some light on this problem, I'd appreciate it.

Thx
titanium681 is offline Find More Posts by titanium681
Reply With Quote
Sign up now
to remove ads between posts
Old Apr 25, 2015, 08:43 PM
titanium681 is offline
Find More Posts by titanium681
Registered User
United States, NV, Las Vegas
Joined Feb 2015
20 Posts
Hard to believe that I'm the only one who bought this plane.
titanium681 is offline Find More Posts by titanium681
Reply With Quote
Old Apr 25, 2015, 09:14 PM
CoolerByTheLake is offline
Find More Posts by CoolerByTheLake
Do it Right, the first time!
CoolerByTheLake's Avatar
United States, MN, Hermantown
Joined Dec 2008
7,008 Posts
Post this in the foamy forum-- you might get some help there.
CoolerByTheLake is offline Find More Posts by CoolerByTheLake
Reply With Quote
Old Apr 26, 2015, 01:21 AM
titanium681 is offline
Find More Posts by titanium681
Registered User
United States, NV, Las Vegas
Joined Feb 2015
20 Posts
Thx
titanium681 is offline Find More Posts by titanium681
Reply With Quote
Old May 06, 2015, 07:50 PM
SandShark is offline
Find More Posts by SandShark
Registered User
United States, CA, Anaheim
Joined Apr 2015
12 Posts
on the ailerons you need to have two channels on your RX and then assign on the TX the channels you wish to control. I have a 9 channel Spectrum. As far as the TV you can use a y-harness on both the rudder channel and the elevator and thus run you tv off the channels assign to the elevator and rudder. It is rather simple when you think about it.
SandShark is offline Find More Posts by SandShark
Reply With Quote
Old May 06, 2015, 07:52 PM
SandShark is offline
Find More Posts by SandShark
Registered User
United States, CA, Anaheim
Joined Apr 2015
12 Posts
Another easy fix on the Ailerons is to use a servo reverser if you only have the one channel to work with. You can get one from HK for about $2.00. Again another easy fix.
SandShark is offline Find More Posts by SandShark
Reply With Quote
Old May 06, 2015, 09:20 PM
CoolerByTheLake is offline
Find More Posts by CoolerByTheLake
Do it Right, the first time!
CoolerByTheLake's Avatar
United States, MN, Hermantown
Joined Dec 2008
7,008 Posts
Quote:
Originally Posted by SandShark View Post
Another easy fix on the Ailerons is to use a servo reverser if you only have the one channel to work with. You can get one from HK for about $2.00. Again another easy fix.
Personally , that would be the last thing I'd do --failure rate is way to high for me -even if it's a cheap plane of $400-$500.. Just look up servo reversing on YouTube-- shows how to do it. Not hard at all.
CoolerByTheLake is offline Find More Posts by CoolerByTheLake
Reply With Quote


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Wanted BH/LX Models MIG-29 Kit JGuilty13 Aircraft - Electric - Jets (FS/W) 4 Mar 23, 2015 09:17 AM
Discussion LX MIg 29 with orange 9ch help Robert Boudreau Foamy EDFs 1 Jan 11, 2015 09:34 PM
Sold NIB LX Models Mig 29 (twin 70mm) jdubg23 Aircraft - Electric - Jets (FS/W) 1 Mar 27, 2014 08:55 AM
For Sale My Very Customised LX MIG-29 brandonmoon Aircraft - Electric - Jets (FS/W) 26 Feb 12, 2014 04:13 PM
Question Names of any vendors selling the lx mig 29 or lx f-22 rjp0325 Foamy EDFs 23 Mar 27, 2013 04:33 PM