|Jun 05, 2012, 06:24 PM|
Got my first Dynam 10 - need some advice please
This is my first foray into EDF flying and I picked the Dynam A10 because of all the excellent reviews and how sturdy it is.
I decided the eliminate the landing gear and replaced it with skids.
I followed all recommendations regarding scraping away the paint before applying 15 minute expoxy to the vertical tail surfaces and the ducted fan assembly. Also put a dab of CA to make sure the servos will stay in place as well as using loctite on the control horn adjustment screws
Applied decals and added a AR500 receiver so now I am ready to take to the air but still have some questions regarding the strenghting of certain parts of the fuselage to make it a little more durable.
GC for is set for 72.5 from leading edge upside down and it balances very well.
Where should I insert any straightening rods to reinforce the wing and tail. Any other tips greatly appreciated including any other places for reinforcement. Should I cut a hole in the fusey for more air or just run by 2200 30 pacs.
Should I cut holes in the fusey for better airflow around the esc's
Should I use recommended aileron and rudder throws. Can I come in slow or hot.
Lots of questions... sorry... just want to make it right the first time. Thanks again.
I want this first flight to be memorable and enjoyable. Please let me know if I have missed anything. Thanks.... New A10 newbee.
PS. How long should I expect a flight to last flying normal speeds at running a 2200mah 30c pack
|Jun 08, 2012, 07:27 PM|
|Jun 18, 2012, 09:06 AM|
Really like mine. Also hand launch with no issues. I use some reflex (up elevator) to compensate for a slight nose heaviness. Flies like it's on rails, and super durable. I bought the airframe only, and used my own stuff.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Question||Need advice on purchasing my first quad please.||Papa Raboon||Multirotor Talk||4||Oct 26, 2012 08:06 PM|
|Discussion||Looking for some advice on my first micro-ish build||C₄H₁₀||Scratchbuilt Indoor and Micro Models||12||Jun 25, 2012 12:34 AM|
|Discussion||Got my first Dynam 10 - need some advice please||bimmerland||Electric Ducted Fan Jet Talk||2||Jun 05, 2012 06:15 PM|
|Discussion||Need some advice regarding the Dynam T-28! Please Help!||aviator4934||Beginner Training Area (Aircraft-Electric)||4||Jan 20, 2012 12:07 PM|
|Build Log||First Quad-X build: Need some advice||PyroPanda||Multirotor Talk||3||Dec 02, 2011 05:57 PM|