Electric Formula One: List of Recommended and Approved Components
There has been a lot of interest in the new Electric Formula One pylon racing event. Many old veterans to pylon racing as well as new guys that have never raced before want to give the event a try. We have seen the recurring inquiry on this forum that asks "what kits are available and what are the key components that are approved or recommended for the event?"
To this end, I have compiled a list of the approved and recommended key components that make up an electric Formula One model. As time goes on and more kits and components are approved or proven to be successful, I will try to keep the list up to date.
Note: "Approved" components are specified as to what the rules will allow. ie. specific approved motors, or specific approved propeller, or specific approved ARF kits.
"Recommended" components refers to various components used in an E-F1 legal model that have been found to work well, are of reasonable cost, and meet the intent of the rules. Recommended components are simply suggestions to those that want direction for what works. These items are not required, nor are they in any way specifically endorsed by the NMPRA.
To be honest, they are simply off the top of my head from what I know to work well by my experience and by the experiences of others.
NMPRA Electric Formula One - List of Approved and Recommended Components
Event rules state: All motors shall be approved for use by the EF1 Committee prior to their being entered in competition.
As of Feb-2011 the following motors are approved
E-Flite Power 25 1250kV outrunner motor Product number: EFLM4025B
Turnigy AerodriveXp 25 SK Series 35-42 1250Kv. Product number: SK3542-1250
Arrowind 2820-07, 1300 Kv motor. Product number: BH-1834
OS Brushless Motor OSMG9525, 1200 Kv motor. Product number: OMA-3820-1200
Great Planes Rimfire EF1 Race 35-45-1250kV Outrunner BL. Product number: GPMG4630
Hobby King NTM Prop Drive Series EF-1 Pylon Racing Motor 1300KV / 930W
OS Brushless Motor OSMG9524, 1200 Kv motor. Product number: OMA-3820-1200
Event rules state: Propeller shall be the APC 8 x 8 Thin Electric Propeller, part number LP08080E
Event rules state: Lithium Polymer (Lipo) chemistry, maximum four cells, maximum battery pack weight is 335 grams
There are numerous manufacturers and sources of distribution for batteries that meet this requirement.
Turnigy 4S-2650mah 30-40C
Thunderpower 4S-2700mah G6 Pro Power 65C
Part #: TP2700-4SPP65
Thunderpower 4S-2700mah G8 Pro Power 70C
Part #: TP2700-4SPF70
Dinogy 4S-2600 65C
Dinogy 4S-3300 30C
Recommended Speed Controller
Event rules state: Minimum 60 amps capacity, Retail price cap of $150 USD, BEC is optional
Turnigy Plush 60A Product number: TR_P60A
Castle Creations Phoenix 60A Product number: PHX-60
Castle Creations Phoenix Ice Lite 75 Product number: 010-0070-00
EFlite 60Amp Pro Switch-Mode Controller Product number: EFLA1060
Event rules state: All designs, past and future inclusive, shall not be entered in competition until three (3) accurate views or photos of the model and the full-scale prototype aircraft have been submitted to the NMPRA EF1 Approval Committee and approved.
LR-1A Pogo Product number: EFL4200 (Limited availability as of 2014. Also check Ebay)
EFlite Shoestring Product number: EFL4205
Nitroplanes Miss Dara Product number: 28A05-Dara-Kit
Great Planes Proud Bird Product number: GPMA1260
Hanger 9 Sundowner 36 (Considered an E-F1 "trainer". Not competitive in an official race with others in this list.)
Airborne Models Outrageous and Scarlet Screamer
Laser Cut Wood Kits:
Wagner Solution from Archie Adamisin
Little Toni and TomCat from SuperTRC.com
Nemesis from Red Jensen
Fandango from Doug Sewell, Winnipeg, Manitoba, Canada
The contact email is firstname.lastname@example.org
Miss Lynn and Thunder Chicken from Matney Models
Polecat from RBC Kits On-Line
United States, CO, Parker
Joined Aug 2005
I am trying to capture the ARF and laser cut wood kits that are commercially available.
I have an Outrageous as well but it was a limited run of kits from Jerry and Dan. I am not aware that the Outrageous and Dara kits are commercially available at this time. If you are scratch building, I am not capturing the many, many scratch-build capable plans that are available.
Randy great list!!
As far as the Miss Dara and Outrageous are concerned. Both are on a limited run basis and as ARF version of each become available neither will be offered in kit form again.
As it stands now I only have one Outrageous kit left and 6 Miss Dara kits. Once these are sold, I don't plan to offer them again.
I believe that the race scheduled for May in Muncie will also have EF1. I need to confirm this but I heard there is a strong chance that it will happen. As well as a EF1 only race possibly in Dayton, OH later this year. Plus the Cincinati race in June will have EF1.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||NMPRA Electric Formula One Racing is Here!||John Jennings||High Performance||4163||Jul 30, 2015 12:38 AM|
|Discussion||Have Scale components one built one NIB for Sale||PaulGT3||Scale Helicopters||2||Dec 18, 2010 07:29 PM|
|Discussion||NMPRA Electric Formula 1 race in Texas||George Parks||Electric Flight Events||2||Nov 11, 2010 06:28 PM|
|Discussion||Attention! ROAR Approved Lithium Technology Batteries List has updated now||kelly632851970||Batteries and Chargers||0||Oct 14, 2009 03:23 AM|
|one successful Electric control line formula||robertc||Control Line||2||Jun 03, 2001 03:42 AM|