HobbyKing.com New Products Flash Sale
Reply
Thread Tools
Old Apr 16, 2009, 09:36 AM
Hals und Beinbruch !!!!
lw_hughes's Avatar
Joined Aug 2002
730 Posts
Discussion
Spektrum 1.5-Gram Linear Servo?

Just checking out the parkzone page on their new su-26. Looks pretty sweet! Wondering about this new micro servo.http://www.parkzone.com/Products/Def...odID=SPMAS2000

wonder if it will work with old vapor bricks.
lw_hughes is offline Find More Posts by lw_hughes
Reply With Quote
Sign up now
to remove ads between posts
Old Apr 16, 2009, 10:40 AM
Doing it in the Lateral Axis
modfly's Avatar
USA, OH, Akron
Joined Dec 2006
15,360 Posts
Quote:
Originally Posted by lw_hughes
Just checking out the parkzone page on their new su-26. Looks pretty sweet! Wondering about this new micro servo.http://www.parkzone.com/Products/Def...odID=SPMAS2000

wonder if it will work with old vapor bricks.
No. unless they have a green dot. Then you will have to add a connector to interface the servo as well.
modfly is offline Find More Posts by modfly
Reply With Quote
Old Apr 16, 2009, 10:46 AM
Gravity is a harsh mistress.
Tim Wolff's Avatar
United States, MI, Temperance
Joined Sep 2002
6,582 Posts
A soldering iron is the universal connector.
Tim Wolff is online now Find More Posts by Tim Wolff
RCG Plus Member
Reply With Quote
Old Apr 16, 2009, 10:49 AM
Doing it in the Lateral Axis
modfly's Avatar
USA, OH, Akron
Joined Dec 2006
15,360 Posts
Quote:
Originally Posted by Tim Wolff
A soldering iron is the universal connector.
True, But it takes skill to solder this particular connection and may be beyond the scope of those uninitiated to soldering.
modfly is offline Find More Posts by modfly
Reply With Quote
Old Apr 16, 2009, 06:58 PM
What goes up must come down..
Canada, QC, Saint-Laurent
Joined Jan 2002
1,724 Posts
and good eyes ;-)
rodair is offline Find More Posts by rodair
Reply With Quote
Old Apr 16, 2009, 08:05 PM
Team30 Micro EDF
NitroCharged's Avatar
Adelaide, Australia
Joined Apr 2004
11,242 Posts
I'd solder that with one eye closed......



Seriously, I would, because the open eye would be holding a jewelers eye glass to see the pads!
NitroCharged is offline Find More Posts by NitroCharged
Reply With Quote
Old Apr 16, 2009, 08:07 PM
Inciting Riots
village_idiot's Avatar
Joined Dec 2006
9,687 Posts
Can't be as hard as soldering an 80 leg .5 pitch PIC
village_idiot is offline Find More Posts by village_idiot
Reply With Quote
Old Apr 16, 2009, 08:21 PM
What goes up must come down..
Canada, QC, Saint-Laurent
Joined Jan 2002
1,724 Posts
and no shaking here..good flux and just a touch with Both ends ready.
RMB, I am not having a welding station so it makes things worst....but if I do a brilliant shinning weld I know I did weld well...I relax myself from holdind my breath at times I do..sometimes I pray and say gratitude to my parents...that past away lately.
rodair is offline Find More Posts by rodair
Reply With Quote
Old Apr 16, 2009, 08:50 PM
is it supposed to smoke??
3dFlyer88's Avatar
canada alberta outside edmonton
Joined Apr 2007
2,918 Posts
ive got one of these fancy green dot rxs may have to do something with that 5th channel. Im getting a new Cessna with a vapor rx not sure if its green dut but could do a switch out. Get one of these servos and solder her on the board. Think the ailerons would be worth it?
3dFlyer88 is offline Find More Posts by 3dFlyer88
Reply With Quote
Old Apr 16, 2009, 08:52 PM
Gravity is a harsh mistress.
Tim Wolff's Avatar
United States, MI, Temperance
Joined Sep 2002
6,582 Posts
I usually use a double Deward's to steady my hands for these tasks.

Sorry to hear about your folks Roger.
Tim Wolff is online now Find More Posts by Tim Wolff
RCG Plus Member
Reply With Quote
Old Apr 16, 2009, 09:11 PM
What goes up must come down..
Canada, QC, Saint-Laurent
Joined Jan 2002
1,724 Posts
Thanks Tim,
I will just change my old welding tip for tonite I am not yet clear about ISP change over so plz roger this.
rodair is offline Find More Posts by rodair
Reply With Quote
Old Apr 16, 2009, 09:34 PM
RC Connectors dot com
glenn2626's Avatar
United States, CO, Colorado Springs
Joined Jan 2008
1,176 Posts
Quote:
Originally Posted by Tim Wolff
I usually use a double Deward's to steady my hands for these tasks.
Tim, you just CANNOT throw that out there and not explain...

Googled lots of combinations, searched here on RCGroups, nada. Got me stumped.
glenn2626 is offline Find More Posts by glenn2626
RCG Plus Member
Latest blog entry: New Xtreme Video TX cable
Reply With Quote
Old Apr 16, 2009, 10:05 PM
Gravity is a harsh mistress.
Tim Wolff's Avatar
United States, MI, Temperance
Joined Sep 2002
6,582 Posts
Sorry, I should learn to spell better.

Double Scotch Whisky
Tim Wolff is online now Find More Posts by Tim Wolff
RCG Plus Member
Reply With Quote
Old Apr 16, 2009, 10:56 PM
RC Connectors dot com
glenn2626's Avatar
United States, CO, Colorado Springs
Joined Jan 2008
1,176 Posts
Gotcha

Gotta say, it reminds me of a gig in Scotland for several months as a consultant - spent many a weekend touring the countryside Whiskey distilleries... Got me hooked.

Then there's Mike Myers and his SNL skit...

Welcome to All Things Scottish - if it's not Scottish, it's craaaapp!! Can I help ye?

(sorry, no video I can find anywhere, SNL's probably had hundreds of copies of the skit whacked off YouTube...)
glenn2626 is offline Find More Posts by glenn2626
RCG Plus Member
Latest blog entry: New Xtreme Video TX cable
Reply With Quote
Old Apr 17, 2009, 01:51 AM
Building toys since 1941
Extreme southeast Kansas
Joined Aug 2007
126 Posts
Quote:
Originally Posted by glenn2626
Gotcha


Then there's Mike Myers and his SNL skit...

Welcome to All Things Scottish - if it's not Scottish, it's craaaapp!! Can I help ye?

(sorry, no video I can find anywhere, SNL's probably had hundreds of copies of the skit whacked off YouTube...)
At least for now here is a Mike Myers skit that is on YouTube

http://www.youtube.com/watch?v=0uSkwhTIlts
Keithhs is offline Find More Posts by Keithhs
Reply With Quote
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Idea Sub 1.5 gram Actuator Drive Spread Spectrum is here... Andy Birkett Scratchbuilt Indoor and Micro Models 34 Mar 10, 2011 01:00 PM
Discussion 1.5 gram motor Flying glass Scratchbuilt Indoor and Micro Models 5 Dec 14, 2008 06:53 PM
Discussion E-Sky EK2-0508 7.5 Gram Digital Servo MikeBiv Radios 1 Nov 28, 2008 02:20 PM
Video 1.5 Gram Living Room Flyer! micromad Electric Plane Talk 2 Jul 29, 2008 09:29 PM
Yippee! 1.5 gram 3ch plane david_dewit Scratchbuilt Indoor and Micro Models 169 Apr 25, 2008 07:14 PM