trex 450 AH-6

lightfighter363 · 05:51 PM

RC aerodyne send me a wrong little bird. it's just a regular MD500

. as you can see there is no weapon plus there should me a hole on the side of the fuselage to insert the weapon boom.

this is what it supposed to be.

Ado · Jan 08, 2013, 05:18 PM

Not sure why you are posting this on here? Why aren't you letting RCA know and asking them to fix the issue? Posting it on here isn't going to get it fixed.

cap231ex · Jan 08, 2013, 05:31 PM

+1 Ado

This is not the way to resolve an issue with a supplier or vendor.

You should call Cliff or email him directly and explain your problem to him , going about it this way is in very poor taste and just not the way we do things around here.

Make sure you get ahold of Ciff and not just someone who works there , he wiil correct the issue you have quickly.

lightfighter363 · Jan 08, 2013, 05:53 PM

Ok. my bad. but i am still thinking about the build so i figured to post it in here. RCa replied and they said this is the right fuselage.

darthdrk · Jan 09, 2013, 06:27 PM

RTFs and ARFS are killing the hobby.

lightfighter363 · Mar 09, 2013, 06:04 PM

done

Bad Creation · Mar 10, 2013, 03:52 PM

Are those the Weighted tip Blades

lightfighter363 · 09:28 PM

Quote:

Originally Posted by Bad Creation

Are those the Weighted tip Blades

No idea what are they, they just came with the 4 blade rotor

Dongskie · Mar 11, 2013, 06:09 PM

like!!!

FiveZigen · Mar 12, 2013, 02:49 PM

It looks like a copter X head so if the blades came with it then they are the unweighted version as Ehirobo does not sell the weighted version.

Keyrigger · Mar 12, 2013, 03:03 PM

It does look good but if there was one improvement I could suggest, get all four of the landing gear legs to touch the ground at the same time while it is at reast so that any rocking caused by the three legged gear cannot happen. It is the first time I have seen the flapping head at rest and it does look very real with the droop in the blades. Take care.

Don

lightfighter363 · Mar 12, 2013, 05:11 PM

Quote:

Originally Posted by Keyrigger

It does look good but if there was one improvement I could suggest, get all four of the landing gear legs to touch the ground at the same time while it is at reast so that any rocking caused by the three legged gear cannot happen. It is the first time I have seen the flapping head at rest and it does look very real with the droop in the blades. Take care.

Don

thanks for the advise man. yeah i will try to fix those LG.i'm trying to spread them more.

@fivezigen.

yes they came from copter x. what is the different between the weighted and non?

lightfighter363 · Mar 12, 2013, 05:36 PM

a little test flight.

Trex 450 mh6 test flight (1 min 35 sec)

FiveZigen · Mar 13, 2013, 02:10 PM

The weighted blades were designed to be run with no E-stab system. The weight in the tip of the blade provides stability to the helicopter. How do the plastic blades fly with the flapping head you have? I have the same combo for a 500 scale project I am working on and was unsure wether there would be to much flap in the blade with the combo of the two together.

lightfighter363 · Mar 13, 2013, 07:41 PM

Quote:

Originally Posted by FiveZigen

The weighted blades were designed to be run with no E-stab system. The weight in the tip of the blade provides stability to the helicopter. How do the plastic blades fly with the flapping head you have? I have the same combo for a 500 scale project I am working on and was unsure wether there would be to much flap in the blade with the combo of the two together.

This plastic are not bad. But i want to try the weighted tip. Where can i get them?

Jan 08, 2013, 05:09 PM	#1
lightfighter363 Registered User United States, IL Joined Aug 2012 175 Posts	trex 450 AH-6 RC aerodyne send me a wrong little bird. it's just a regular MD500 . as you can see there is no weapon plus there should me a hole on the side of the fuselage to insert the weapon boom. this is what it supposed to be.
	Last edited by lightfighter363; Jan 08, 2013 at 05:51 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Discussion Cinestar 6 Maiden Flight and Setting Up AH PH	chaurais	Multirotor Talk	0	Sep 11, 2012 05:33 AM
Help! my syma s012 AH-64 wont charge	ziro	Coaxial Helicopters	1	Jul 22, 2012 05:21 AM
Discussion Crashed my new dji s800, 100%totally not my fault. I'm so friggn pissed off right now	jasper7821	Multirotor Talk	137	Jun 13, 2012 10:46 AM
Discussion Ah no, lost my plane! RECOVERED!	slowjett	Video Piloting (FPV/RPV)	49	Apr 29, 2012 03:44 AM
Question GPS and AH functions not working with Firmware 4.0	ross_badger	Hoverfly Technologies	13	Apr 08, 2012 11:02 AM

RCG Sites

About RCG

Features

Tools

Media

Topics

Jan 08, 2013, 05:18 PM	#2
Ado Meow? Brisbane Intl, Australia Joined Sep 2001 1,562 Posts	Not sure why you are posting this on here? Why aren't you letting RCA know and asking them to fix the issue? Posting it on here isn't going to get it fixed.

Jan 08, 2013, 05:31 PM	#3
cap231ex Track clear , smoke on ! 3 miles from AMA HQ Muncie, IN. Joined Jan 2009 1,720 Posts	+1 Ado This is not the way to resolve an issue with a supplier or vendor. You should call Cliff or email him directly and explain your problem to him , going about it this way is in very poor taste and just not the way we do things around here. Make sure you get ahold of Ciff and not just someone who works there , he wiil correct the issue you have quickly.

Jan 08, 2013, 05:53 PM	#4
lightfighter363 Registered User United States, IL Joined Aug 2012 175 Posts	Ok. my bad. but i am still thinking about the build so i figured to post it in here. RCa replied and they said this is the right fuselage.

Jan 09, 2013, 06:27 PM	#5
darthdrk My hobby is why Im broke USA, TN, Millington Joined Dec 2002 6,855 Posts	RTFs and ARFS are killing the hobby.

Mar 09, 2013, 06:04 PM	#6
lightfighter363 Registered User United States, IL Joined Aug 2012 175 Posts	done

Mar 10, 2013, 03:52 PM	#7
Bad Creation Registered User United States, FL, Orlando Joined Dec 2009 909 Posts	Are those the Weighted tip Blades

Mar 11, 2013, 06:09 PM	#9
Dongskie Dongskie Philippines, NCR, Mandaluyong City Joined Jul 2007 914 Posts	like!!!

Mar 12, 2013, 02:49 PM	#10
FiveZigen Registered User Canada, BC, Terrace Joined Feb 2010 81 Posts	It looks like a copter X head so if the blades came with it then they are the unweighted version as Ehirobo does not sell the weighted version.

Mar 12, 2013, 03:03 PM	#11
Keyrigger Love my scale Whirlybirds Mississauga, Ont., Can. Joined Sep 2009 2,106 Posts	It does look good but if there was one improvement I could suggest, get all four of the landing gear legs to touch the ground at the same time while it is at reast so that any rocking caused by the three legged gear cannot happen. It is the first time I have seen the flapping head at rest and it does look very real with the droop in the blades. Take care. Don

Mar 13, 2013, 02:10 PM	#14
FiveZigen Registered User Canada, BC, Terrace Joined Feb 2010 81 Posts	The weighted blades were designed to be run with no E-stab system. The weight in the tip of the blade provides stability to the helicopter. How do the plastic blades fly with the flapping head you have? I have the same combo for a 500 scale project I am working on and was unsure wether there would be to much flap in the blade with the combo of the two together.