HobbyKing.com New Products Flash Sale
 
Thread Tools
Old May 04, 2003, 03:01 AM
Mattus
Guest
n/a Posts
Motor screws

Was out bashing today, managed to lose one of the screws that holds the
endbell on the motor. Any ideas where I can get some more cheap? I'm in UK
BTW.

Thanks,
Matt


Old May 04, 2003, 03:01 AM
Paul - xxx
Guest
n/a Posts
Re: Motor screws

Mattus wrote:
> Was out bashing today, managed to lose one of the screws that holds
> the endbell on the motor. Any ideas where I can get some more cheap?
> I'm in UK BTW.
>
> Thanks,
> Matt


Yeah, sure .. from a motor endbell shop ..

Seriously, any local model shop will have loads in, often in the back
room where they work on 'bits'. They will likely give you some for
free, if you know them well enough. Otherwise, take the other screw off
and go to a hardware store. Tell them to check the thread and have they
any more screws similar .. Don't be tempted to use a self-tapping screw,
you *will* screw up the endbell the next time you want to cut a brush or
comm ..

--
....................................Paul-xxx
Completed 1632 Seti work units in 12467 hours
http://setiathome.ssl.berkeley.edu/


Old May 07, 2003, 03:02 AM
sanj.varah
Guest
n/a Posts
Re: Motor screws

if paul's idea doesn't work, go down to your local bearing supplier they
usually have one off screws everywhere.

sanj

--
Visit my RC Homepage
http://www.schumacher.clara.net


"Mattus" <matt_t_wood@nospamhotmail.com> wrote in message
news:b91dh2$1c6$1@hercules.btinternet.com...
> Was out bashing today, managed to lose one of the screws that holds the
> endbell on the motor. Any ideas where I can get some more cheap? I'm in UK
> BTW.
>
> Thanks,
> Matt
>
>



 


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
edf motor screws? Joat Power Systems 3 Oct 24, 2004 10:49 PM
motor screws for GWS edp-50xc nonaste Micro Helis 6 Oct 06, 2004 02:35 PM
Aveox 27/39 motor screws snap GoodTill Power Systems 8 Oct 20, 2003 05:18 AM
Corona Motor Screws ? rcav8r2 Electric Heli Talk 7 Apr 25, 2002 10:24 PM
Where do I get S400 Motor screws? Sal C Electric Plane Talk 10 Sep 27, 2001 12:10 AM