Espritmodel.com Telemetry Radio
Reply
Thread Tools
Old May 04, 2009, 09:48 PM
Wandering IT geek
ronin4740's Avatar
United States, NV, Reno
Joined Aug 2005
3,911 Posts
Help!
Turnigy 5055-580 and 8mm Prop adapter

I could use a hand keeping a collet style prop adapter on the shaft of a Turnigy 5055-580 motor. The plane it's in has a reverse mount meaning that the motor is mounted behind the firewall. Using the included adapter won't work as I have no way to mount the motor in that direction.

I used a socket wrench to cinch the adapter down and thought it was on good and tight but it still broke free at about half throttle with a 6S battery. This is about 7200 RPM if I'm doing the math right (((25.2*6)/2) * 580). I plan to use a smaller prop next time around but am still going to spin the snot out of this motor...

So, what's the best way to keep a big cinch this prop adapter down onto the motor? Loctite or...?

Thanks in advance!
ronin4740 is offline Find More Posts by ronin4740
Reply With Quote
Sign up now
to remove ads between posts
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale Wanted - 8mm collet adapter for 8mm shaft prop leybold12 Aircraft - Electric - Power Systems (FS/W) 0 Oct 06, 2008 02:17 PM
Discussion HXT/Turnigy Prop Adapter & Spinner scrapster Power Systems 2 Jan 31, 2008 05:30 AM
Help! Bolt-on prop adapter for HXT 35-48 900kV (Turnigy) Straight Up Power Systems 13 Jan 08, 2008 11:26 PM
Discussion Help Need 8mm Prop Adapter for HXT 50-68b Motor thesenator Power Systems 12 Nov 09, 2006 05:11 AM
Discussion 8mm (motor shaft) prop adapter, do they make such a thing? BlazerB52 Power Systems 2 Jul 19, 2006 05:18 PM