|May 26, 2010, 12:26 PM|
Joined Oct 2006
Heli Motor On Wing?
I have an ESKY Belt CP with brushless main motor and was wondering if i could mount it to one of my flying wings (Combatwings XR)?
Any idea if the Motor/ESC/LiPo would have enough rpm etc? Details of the parts are below...
|May 26, 2010, 09:12 PM|
I'm sure it'll fly You'll need to get the right propeller though.
I have been playing around with a 3000KV 25 gram motor, and I believe it drew over 20 amps with a 4.5 x 4.5 prop. I am amazed it's surviving that amp draw You'll want an even smaller prop. A 4.1x4.1 could be a good place to start, but I'd recommend you use a wattmeter to check that you're not frying the ESC. Remember that small props that spin fast generate a thin but fast airflow, so the wing might not have a lot of acceleration/power, but a high top speed.
I have several wings, and I'm most happy with the one that has a 50 gram motor around 1800KV turning a 7x6 prop on 3S. Lots of push, easy vertical climbs and plenty of speed.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||Cons to 500 motor on 450 heli?||primer||Mini Helis||6||Feb 19, 2010 04:27 PM|
|Discussion||Two 2.4Ghz RX on same heli / Two 900Mhz Vid TX on same heli||daltron||FPV Talk||3||Dec 02, 2009 08:00 PM|
|For Sale||22 inch EPP wing Kit w/3000kv, 24 gm brushless motor, APC Prop, can be FAST, ON SALE||sylair||Aircraft - Electric - Airplanes (FS/W)||2||Nov 27, 2009 05:14 PM|
|Discussion||motor mount on glider wing||Ruud_NL||Sailplane Talk||3||Sep 22, 2009 04:39 PM|
|How to silence the motor on rear mounted motor on a flying wing?||soholingo||Flying Wings||21||Jul 24, 2004 07:44 AM|