|Feb 18, 2014, 09:49 AM|
I built a dollar tree foam plane and it weighs about 997 grams. What is a good size motor and esc? Im trying a 650kv and 50a esc. Im kinda new to the motor sizes and pull. Faster v slower and stronger. This is my 3rd scratch build. She flew really nice. I landed it fine, but rolled into a snow/ice bank and now the motor has lost power. I tried different batteris, my main battery for it is a 14.8 2200 mah. Any ideas?
|Feb 18, 2014, 11:02 AM|
Hi Fepsphan,The motor should be able to get wet,did you take the prop off and put it on backwards?
Usually approx 10% of plane weight is a good place to start for motor weight.Kv will depend on the type of plane it's for and size of prop you want to spin.
Maybe blow the motor out with compressed air while turning over by hand,I've had sand and gravel get in there and make it feel chunky.Hope this helps,maybe someone else will have ideas.
Try this site also.
|Feb 18, 2014, 04:31 PM|
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Question||No 3rd party motor mount for the eflite 180 size motor?||cookie4524||Scratchbuilt Indoor and Micro Models||11||Nov 21, 2013 08:07 PM|
|Question||28 Size Outrunner motor that can withstand 1000+ Watts.||Wooosh Movement||Power Systems||15||Sep 21, 2013 01:01 PM|
|Discussion||Electric motor sizes V's Glow motor sizes||woodsy||Australia||9||Mar 23, 2011 10:37 PM|
|For Sale||3 GWS 300/350 size motors & 1 600 size motor||pc_pilot||Aircraft - Electric - Power Systems (FS/W)||4||May 09, 2009 10:56 PM|
|Discussion||motor sizes how do they size a motor?||darklyte24||Power Systems||3||Dec 18, 2006 07:07 PM|