 |
 |
|
 |
 |
 |
Oct 17, 2008, 10:11 AM
|
||
Shijr, Taiwan. DungGwan, China. City of Industry, California.
Joined Sep 2001
19,435 Posts
|
How fast the servo speed needed for 3 D flyers?
How fast the servo speed needed for 3 D flyers?
GWS will start to make NARO servos digitalized. Wish the specs shown as below will do help the 3 D helicopter flyers.  http://www.rcgroups.com/forums/showp...4&postcount=14 Quote:
S9257 26g 2.0kg 0.08sec at 4.8V plastic gears 35.5X15X28.6mm GWS super D 4Kg-cm 0.065sec. at 6V metal gears cut by a Taiwan vendor who makes camera gears for Japanese name brands using Swiss euipments mechined! GWS super D 3.6Kg 0.077sec at 4.8V 27 x 12.7 x 26.65 mm at 19 grams $30 only!  The plastic gears GWS NARO size digital servos cost you only $20.  How much are you paying for those S9254, S9257 and others? Yet, Futaba didn't say that is analog or digital amp?  I also check many major brands sub-micro's performance, wish this will be a great step to fly 3D helicopter more wild and crazy!
|
|
|
|
|
|
|
|
Oct 17, 2008, 10:24 AM
|
|
|
Shijr, Taiwan. DungGwan, China. City of Industry, California.
Joined Sep 2001
19,435 Posts
|
Just finished a few hundreds NARO digital servos with plastic gears sample production.
 Should be already on the way since last weekend! I am not sure which type ordered? ( I am in Japan for Tokyo RC Model show )  Contact GWS China factory: china@gws.com.tw service@gws.com.tw Business inquiry: export@gws.com.tw |
|
|
|
|
Oct 17, 2008, 10:28 AM
|
|
|
Shijr, Taiwan. DungGwan, China. City of Industry, California.
Joined Sep 2001
19,435 Posts
|
A closer ref. with GWS SUPER D in Hi-tec should be:
HSG-5085MG 3.5Kg-cm 0.14sec 29X13X30mm at 21.3g $??? GWS super D 4Kg-cm 0.065sec. 27 x 12.7 x 26.65 mm at 19 grams $30 only! GWS metal gears cut by Swiss machines in Taiwan by a vendor who made camera gears for Japanese leader name brands! Accurate and less backlash. What will be your choice? 
|
|
|
|
|
Oct 17, 2008, 11:17 AM
|
|
|
Shijr, Taiwan. DungGwan, China. City of Industry, California.
Joined Sep 2001
19,435 Posts
|
The closer reference of JR servos:
DS3401 4.3Kg 0.19sec 30g DS3405 2.8Kg 0.19sec 30g DS3500G 2.0Kg 0.07sec 26g The closer reference of Airtronics-Sanwa: SDX-762 3.9Kg 0.15sec 22.6g Any others, pls help us to find the closer reference servos? |
|
|
|
|
Oct 17, 2008, 12:54 PM
|
|
|
Denver, CO
Joined Dec 2005
5,682 Posts
|
Speed is not as important as the dimensions. Servo's that fit each helicopter's cyclic are known, so I would start there. For a Hornet the HS55, or Futaba S3114 are good sizes.
|
 |
|
|
Oct 17, 2008, 01:31 PM
|
||
|
Shijr, Taiwan. DungGwan, China. City of Industry, California.
Joined Sep 2001
19,435 Posts
|
Quote:
Hi-tec HS-55 1.3Kg 0.14sec 22.8X11.6X24mm 8g plastic gears. HS-82MG looks more closer: 3.4Kg 0.10sec 29.8X12X29.6mm 19g The above datas in 6V. |
|
|
|
|
|
|
Oct 17, 2008, 01:37 PM
|
|
|
Shijr, Taiwan. DungGwan, China. City of Industry, California.
Joined Sep 2001
19,435 Posts
|
New Hi-tec Digital servos:
HS-5085MG 4.3Kg 0.13sec 29x13x30mm 21.3g Metal gears. |
|
|
|
|
Oct 17, 2008, 01:44 PM
|
|
|
Shijr, Taiwan. DungGwan, China. City of Industry, California.
Joined Sep 2001
19,435 Posts
|
I can't find KO had any closer reference among this size.
Do you any information on such servos?
|
|
|
|
|
Oct 17, 2008, 06:27 PM
|
|
|
Shijr, Taiwan. DungGwan, China. City of Industry, California.
Joined Sep 2001
19,435 Posts
|
In USA, If you like to get GWS Digital servos information, pls contact:
Operation dept. e-mail: operation@gwsus.com Placing orders, shipment issues, inventory availability and all operation related issues. Marketing e-mail: marketing@gwsus.com Demo, Evaluation, Advertising and all marketing related inquiry. Service e-mail: service@gwsus.com Dealership Inquiry, Production Information, Technical Support, RMA and all general information |
|
|
|
|
Oct 17, 2008, 06:39 PM
|
|
|
Shijr, Taiwan. DungGwan, China. City of Industry, California.
Joined Sep 2001
19,435 Posts
|
Just finished a few hundreds NARO digital servos with plastic gears sample production.
Should be already on the way since last weekend! I am not sure which type ordered? ( I am in Japan for Tokyo RC Model show ) Contact GWS China factory: china@gws.com.tw service@gws.com.tw Business inquiry: export@gws.com.tw Pls see your local dealer first of all! Ask them to read this thread! If they have no interested in GWS digital servos at all? Then contact GWS and using Early Birds programe. http://www.gwsus.com/english/service/earlybird.htm |
|
|
|
|
Oct 29, 2008, 12:05 AM
|
|
|
Shijr, Taiwan. DungGwan, China. City of Industry, California.
Joined Sep 2001
19,435 Posts
|
How about that GWS will make NARO Super Digital in there sizes as below:
NARO Super D 5kg 0.081sec at 6V NARO Super FD 4kg 0.065sec at 6V ( as first time said ) NARO Super XFD 3kg 0.048sec at 6V How do you think? Wish to hear your comments.
|
|
|
|
|
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| How do GWS Pico Servos stack up for 3-D | ScienceGuy | 3D Flying | 8 | Oct 29, 2008 12:08 AM |
| Alert 20% Off Common Sense RC 20C’s for 3-D Flyers and Free Shipping! | mikekomm | 3D Flying | 4 | May 02, 2006 12:56 AM |
| New Product Common Sense RC 20C’s 25% Off for 3-D Flyers Plus Free Shipping! | mikekomm | 3D Flying | 0 | Apr 11, 2006 04:51 PM |
| How to set-up4-channel hitec feather for 3-d | ttrroopprr | 3D Flying | 5 | Mar 29, 2005 07:34 PM |
| AXI motor /speed control for 3 D flying | watchdoctor | 3D Flying | 12 | Aug 15, 2004 11:09 AM |
|
|