HobbyKing.com New Products Flash Sale
Reply
Thread Tools
Old Jul 15, 2008, 03:10 AM
Registered User
Joined Apr 2007
41 Posts
Discussion
60 sized hovercraft

hi this would be my second prodject if i can build a 60 size hover craft

i have an old mds 60 engine arrould i was wondering on dimentions for a craft or could i do any and hope for the best?
bloberts is offline Find More Posts by bloberts
Reply With Quote
Sign up now
to remove ads between posts
Old Jul 15, 2008, 06:54 PM
OCD: Old, Cranky and Disgusted
challenger_i's Avatar
United States, TX, Sweetwater
Joined Mar 2005
1,612 Posts
Several years ago, I built a ground-effect vehicle using a K&B .60 and 12x6 prop. I used anything at hand, as I was just tinkering. The duct was a cut-down 5 gallon bucket, and the base deck was 1/4 plywood, measuring 24x36. Skirt was cobbled up from polyester dress lining. Forward propulsion was two blast tubes, made of paper towel tubes. The beast weighed 7 pounds, and would pop off the ground at 1/4 throttle.

Using better materials, and a better design, I believe you could build an impressive HC.
challenger_i is offline Find More Posts by challenger_i
Reply With Quote
Old Jul 16, 2008, 05:22 PM
Patrick Jenkins
USA, LA, 5
Joined Dec 2006
1,035 Posts
Nice idea. Ducted/Paint bucket
zagimon is offline Find More Posts by zagimon
Reply With Quote
Old Jul 16, 2008, 05:30 PM
OCD: Old, Cranky and Disgusted
challenger_i's Avatar
United States, TX, Sweetwater
Joined Mar 2005
1,612 Posts
Quote:
Originally Posted by zagimon
Nice idea. Ducted/Paint bucket
I was bored, broke and used what was at hand. It was built upon the plans Roy Clough published in 1960, in Popular Mechanics. His was a tethered .020 ship. Needless to say, mine was rather bit larger...
challenger_i is offline Find More Posts by challenger_i
Reply With Quote
Old Jul 18, 2008, 12:59 PM
dusty bible = dirty life
Majortomski's Avatar
Oklahoma City OK USA Where fakts still exist even if they are ignored
Joined Aug 2000
2,777 Posts
I had a 60 size hovercraft kit back in the 70's. IIRC it was about 2 feet wide, and less than 4 feet long. The engine was mounted 30 to 45 degrees up from straight forward and half the prop thrust inflated the skirt and half went out through 5 parallel rudders.

There was a clamshell that came down and provided reverse thrust.

Sorry no pictures.
Majortomski is offline Find More Posts by Majortomski
Reply With Quote
Old Jul 21, 2008, 03:01 AM
Registered User
Joined Apr 2007
41 Posts
cool ill give it a go with those diamentions worst case it wont lift
bloberts is offline Find More Posts by bloberts
Reply With Quote
Old Jul 24, 2008, 09:04 AM
Registered User
Airboatflyingshp's Avatar
B'ham UK
Joined Oct 2005
2,990 Posts
Use Blue foam and/or Correx as the SPAD builders do and it will be strong light and waterproof correx is also fuel acid alkali and cold and fire ressistant. Just close up the exposed ends of the corrugation tubes to stop water ingress.
Airboatflyingshp is offline Find More Posts by Airboatflyingshp
Reply With Quote
Old Feb 26, 2013, 09:15 PM
enter a new realm.....
simz's Avatar
Joined Dec 2012
320 Posts
test
simz is offline Find More Posts by simz
RCG Plus Member
Last edited by simz; May 18, 2013 at 05:19 PM.
Reply With Quote
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
DNHP makes a 60 sized electric! Ben74 Electric Heli Talk 12 Jan 03, 2003 08:49 AM
Yippee! FS: Ready to fly .60 sized "militarized" GP Piper J3 Cub Pilot_Tony Aircraft - Fuel - Airplanes (FS/W) 0 Oct 08, 2002 09:15 PM
Great Planes 60-sized Extra Conversion SoarNeck Sport Planes 6 Aug 29, 2002 12:08 AM
What's the best brushless system (motor/controller) for .40 to .60 sized sport planes rsieminski Power Systems 8 Jan 27, 2002 09:54 PM