|Feb 02, 2013, 01:46 PM|
Parflyer built completely with Honeycomb under vacuum
For those who want to test ...I put a lot of pics about the building process.
That's the build log i post here :
I do my best to explain it in English, ins't perfect but understandable (i hope),
I hope you'll enjoy it,
|Feb 04, 2013, 01:23 PM|
Thank you for my English, but I'm sure there are many grammar mistakes and word errors, but if you can understand thats the essential
Wyowindworks, your datas :
I prefer giving you detailed weights because of my errors in the final achievement and reinforcements choosen.
Weigths of the frames sandwich skins without before assembly (not glued half shells and accessories):
Fuselage and tail: 19.8 gr
Horizontal elevator : 6.3 gr
Frame Elements finished :
Wing (included former, spar, horns, ball joints, steel linkages and servo mount without servo): 44.3 gr
Fuselage, including bulkhead, rods linkage, ball joints horns, various reinforcements and battery mount (without geared motor and electronics and servos) : 39.9 gr
Elevator with hinge and clevis: 6.6 gr
So a total weigth frame : 90.8 gr.
I think we can do even more lighter, we can save at least 10 grams!...
As many of us, I always tend to put too much resin with micro balloons when I glued the half-shells (I like to do sturdy ... but at this scale each gram is really important), except for motor bulkhead, the formers are too heavy and strong. As regards the wing, I make same error as the fuselage, I put too much resin and micro balloons. Because the skins are really strong, the wing spar isnt indispensable, on my next models Ill replace it by studs which ensure the bottom and top surfaces linkage.
Per dmē this layup (Kevlar 36gr/mē + glass 25gr/mē+honeycomb 1.5mm+glass 25gr/mē gives :
Weight calculated to obtain an estimate before implementation: 2, 2 gr / dmē
Weight achieved with flat test specimen: 3,03 gr /dmē
Weight below are "out of the mold (per dmē)" the halfs parts achieved depending on the complexity of the shape:
For the wing: ~ 3.15 gr/dmē
For the fuselage: ~3.98 gr/dmē
For the elevator: ~ 2.86 gr /dmē
Reading that, you can deduct that the more the shape is complex the harder is to obtain a light frame weigth
|Feb 12, 2013, 02:04 PM|
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||What is a good multirotor under $800 for FPV with GoPro?||X14Halo||Multirotor Talk||1||Jan 12, 2013 12:33 PM|
|Sold||Complete built ready to fly Slowstick with 4 channel radio! $85 + Shipping||kctrading||Aircraft - Electric - Airplanes (FS/W)||2||Apr 13, 2009 09:39 AM|
|Discussion||JAZZ With "built-in" BEC under 6s LiPos ? 55-10-32 ?||bmaaa||Kontronik||5||Mar 01, 2006 12:37 PM|
|Has anyone built a pizza box flyer with an ips motor under 10in in wingspan?||Mat||Scratchbuilt Indoor and Micro Models||5||Sep 18, 2004 02:28 PM|
|For Sale Eco 8 built with mechanical mixer complete including radio||karl51||Aircraft - Electric - Airplanes (FS/W)||3||Sep 12, 2003 07:11 AM|