New Products Flash Sale
Thread Tools
Old May 07, 2015, 11:37 PM
Digital Don is offline
Find More Posts by Digital Don
Registered User
Digital Don's Avatar
United States, IL, Manteno
Joined Dec 2006
848 Posts
There's no question that the Yak described on A-Main's web page is a 5 channel aircraft. I assume that's the reason they paid for return shipping which normally would not be covered.

The person who helped me said that he had run across a similar incident that was caused by a mix up in packaging/shipping from EasySky. He also said the mix up did not affect any of the other EasySky planes.

Hopefully yours will be right. If not, they'll make it right at least if my experience is typical.

Don
Digital Don is offline Find More Posts by Digital Don
Reply With Quote
Sign up now
to remove ads between posts
Old May 08, 2015, 03:45 PM
HGhost is offline
Find More Posts by HGhost
Eye in the Sky
HGhost's Avatar
United States, WV
Joined Sep 2013
2,273 Posts
Thanks Don, will see next week when i get it....will let you know.

EDIT:

I also spoke to AMains........they straightened out their web page the day after i ordered

seems all of them are 4 ch......but one place on the box says 5 ch, as did their web site

They offered refund, which was nice...BUT, I am just going to keep the plane either way....( installing flaps is no big deal )

I like this plane regardless of having flaps or not.

I like that color scheme ...i also noticed amazon for instance, also shows these planes and they are marked 4 channel as well.

Guess HK is the only ones that have the 5 channel version...wish they had the Yellow/blue version as well.

Guess I could look around and see if anyone has a spare wing, one can buy ?
HGhost is offline Find More Posts by HGhost
Last edited by HGhost; May 08, 2015 at 05:06 PM.
Reply With Quote
Old May 09, 2015, 12:50 AM
felixx is offline
Find More Posts by felixx
crash expert
New Zealand, Canterbury, Christchurch
Joined Apr 2014
431 Posts
can someone please post a pic of the wire frame on your undercarriage, also what is the thickness of the wire?
felixx is offline Find More Posts by felixx
Reply With Quote
Old May 09, 2015, 02:47 AM
Late99 is offline
Find More Posts by Late99
Registered User
Late99's Avatar
Finland
Joined Aug 2013
240 Posts
Is this what you needed?

This wire for skis is my own bending, not an original part. But it's copied based on the original. The original wire seems to be ~2,1mm or 0,08" in diameter. It wasn't too bad job to bend the wire and it seems to work just as good as the original one...
Late99 is offline Find More Posts by Late99
Reply With Quote
Old May 09, 2015, 02:59 AM
felixx is offline
Find More Posts by felixx
crash expert
New Zealand, Canterbury, Christchurch
Joined Apr 2014
431 Posts
thank you
if you come to NZ I will buy you a beer
felixx is offline Find More Posts by felixx
Reply With Quote
Old May 14, 2015, 03:50 PM
HGhost is offline
Find More Posts by HGhost
Eye in the Sky
HGhost's Avatar
United States, WV
Joined Sep 2013
2,273 Posts
OK, got my Yak in from AMains.com

The Flaps are there and ready , so is a rod that connects them together...one would have to cut loose one side on each flap and install a 6 gram servo and a small rod, similar to what is on the ailerons and of course those little rod adjusters with the screw ( like on the aileron rod )...and the flaps would work

This color scheme is Great...it is actually Yellow and what appears to be a light Charcoal or grey ( not a blue at all.)

I am not even going to put flaps on this one yet.

Going to see what it will do as is First.

Was thinking about using a SAFE Rx that has AS3X...but I may just purchase a Lemon Rx with a stabilizer and see if that will work...may do both and see which is best...not sure yet

That will be a while yet..BUT, I like this color scheme allot.
HGhost is offline Find More Posts by HGhost
Reply With Quote
Old May 15, 2015, 10:00 AM
Ian444 is offline
Find More Posts by Ian444
Brisbane, Australia
Joined Apr 2013
155 Posts
That flap arrangement sounds exactly like how the ARF models from Hobbyking come delivered. I actually bought a receiver with stabilization quite a while ago but never fitted it. I think it would increase my flying enjoyment as the model can get buffeted around by wind gusts, being as light as it is, moreso at low flying speeds. I still haven't gotten around to making the flaps operational either, one day...

Edit - those yellow ones look Mickey Mouse, love it.
Ian444 is offline Find More Posts by Ian444
Reply With Quote


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product EasySky 5Ch Yak-12 tymodel Scale ARF/RTF 2 Apr 29, 2014 11:23 PM
Build Log Rc-Drones Kong8 XL 950mm X8 build w/AG550-NX gimbal Z06 Tony Multirotor Talk 23 Jul 21, 2012 11:15 AM
Discussion 12" WS Yak Torque Issue super_dork 3D Foamies 3 Apr 16, 2012 02:29 AM
For Sale Great Planes 51" Yak-55M Wheel Pants + Wheels NIB $12 Shipped CONUS parkflyer215 Aircraft - General - Miscellaneous (FS/W) 3 Feb 27, 2012 11:49 AM