|Apr 15, 2007, 10:23 AM|
Joined Oct 2005
source of a tow release..?
I am replacing a tow release in a 1/3 scale ship - it was not closing well, and there is an aerotow the last weekend of the month (Muncie, IN).
Any sources? I need to order one asap to be ready for the trip.
|Apr 15, 2007, 08:17 PM|
1/3 scale tow release
Like S2000 said Dymond has one and I bought one in Dec. and just got it out of my supply box to do some measurements for you for a size refrence. It is 2 1/4" long and it is 1/2" outside dia. but it has a thickwall design so it isn't qute 3/8" inside Lobby one except this one has a machined front edge that a large washer slids on to. The washer sits back 1/2" from the nose of the release. The washer provided is roughly 7/8" in outside dia. I like this one because it is sealed in the back and debri can't inter the fuse. Bad thing is if you do nose it in to soft mud you might be spraying water in there to clean out the junk! The arm on it is very thick i would say like 14 gauge and it has a nice smooth gentle curve to the release arm. The cost was $9.95. They stock them. I also picked up a few canopy latches like that are on most kits sold today the one with the red body with the sliding pin they were $4.50 they also had the cockpit kits there I bought a few sets the 1/3 scale size was $6.50 for the seatbelt set made by Multiplex he only had about 10 sets of those left in Dec. I also picked up a 1/3 scale sliding window in Dymonds on packaging and that was $4.50 and it came with the tiny screws to secure it to the canopy. They had instrument handles and control sticks in Dymonds own packaging also 1/3 scale that was $9.50 looks like Multiplex stuff. I bought there instrument kit but there is no price on the kit I remember him looking it up at the checkout stand. They had a smaller nose release and I bought 4 or 5 but gave them away to other club members that were in need. I think they were small like the small one Hobby Lobby sells. If you can't find a release I will send this one to you if you get in a bind just PM . I bought it for my 1/3 scale but that won't start for another month. Plus that gives me another reason to go shopping down iin LA and maybe hit up SoarUSA They had another canopy latch that has a metal round body with a knurdle end nice quality that was $ 4.25 Anyway hope this help you or anyone else.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Cheap and simple tow release and bridle hooks||dgliderguy||Scale Sailplanes||43||Aug 08, 2006 01:57 AM|
|Fox/Salto tow release and wheel installation||scalesoar||Scale Sailplanes||3||Feb 07, 2005 05:53 AM|
|Question||Tow release for all EPP scale ship?||sloperut||Scale Sailplanes||5||Jan 21, 2005 06:22 PM|
|Tow release||Up&Away||Scale Sailplanes||14||Nov 10, 2004 08:10 AM|