|Mar 03, 2014, 03:49 PM|
Joined Mar 2005
Accucell 6 battery vol err cell connect
Have this a year now and only the other day I am getting this with all my lipos
It will charge them direct with out balancing
Opened it up but all looks ok except balance board
Not to sure if there is something wrong here
Any help would be appreciated !
|Mar 04, 2014, 07:57 AM|
Hard to see the pics enough to see a problem. You don't say what size packs your plugging in?
You may have lost a trace jumper, on the circuit board, between the balance pins. The pins are connected in parallel between each cell number pin to the next corresponding sockets cell number pin. In other words pin #1 of each balance socket is connected to all the other #1 plns of the other sockets.
So, if any of these trace jumpers is broken the charger cannot read the cell count.
If you have a multi meter you can check continuity between the corresponding pins to see if there is a break.
That said, there could be other problems with the charger.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Question||" Imput vol err"||rrg||Batteries and Chargers||8||Dec 31, 2013 05:29 PM|
|Discussion||Battery vol err cell high vol||eligri||Batteries and Chargers||6||Jul 07, 2013 12:11 PM|
|Discussion||Turnigy Accucell-6 input vol err||slein69||Electric Power Cars||6||Feb 05, 2013 08:56 AM|
|Help!||Turnigy Accucel-6 50W 5A Balancer/Charger Battery Vol Err||lquick||Batteries and Chargers||13||Mar 28, 2009 09:27 PM|