|Jul 03, 2011, 06:36 PM|
Joined Apr 2011
I have a Flightmax (from HK) 1000mah 3s lipo pack that I've had no issues with for about 20 or so cycles.
Recently, I happened to be watching the individual cell voltages while balance charging the pack. Something odd was happening...
One of the cells was intermittently showing 1V. While that cell dropped to 1V, the second cell showed 7+V, basically as though it was reporting the voltage of 2 cells. It would do this for about 2-5 seconds, then return to "normal" with all 3 cells showing voltages in the correct range.
Is this just an anomaly with the reporting of cell voltage or should I stop using the pack and dispose of it?
So, it looks like I've found the issue, but it leads to another question. One of the wires from the balance lead has disconnected from the battery, which would explain the intermittent issue. Can I solder it back on or is it dangerous?
Update 2: Found some other threads on soldering the leads back in place. Should be no problem. I'm closing the thread, since the issue is solved.
May all of your take-offs and landings be equal!
Last edited by Oakstone; Jul 03, 2011 at 07:22 PM. Reason: Update
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|For Sale||Brand New Traxxas Power Cell 7 Cell (8.4V) 3000mAh Nimh battery and Charger||zsultan||Cars - Cars and Parts (FS/W)||0||Jun 26, 2011 02:31 AM|
|For Sale||Brand New Traxxas Power Cell 7 Cell (8.4V) 3000mAh Nimh battery and Charger||zsultan||Cars - Trucks and Parts (FS/W)||0||Jun 26, 2011 02:29 AM|
|Sold||Traxxas Power Cell 7 Cell (8.4V) 3000mAh Nimh battery and Charger.||zsultan||Cars - Cars and Parts (FS/W)||1||Jun 25, 2011 09:53 PM|
|Sold||Traxxas Power Cell 7 Cell (8.4V) 3000mAh Nimh with traxxas connector and charger.||zsultan||Cars - Trucks and Parts (FS/W)||0||Jun 25, 2011 12:45 AM|
|RPM fluxuation in P10 governor mode||TimGoldstein||Castle Creations||10||Jun 14, 2004 02:52 AM|