Images

chyorn · Jan 10, 2013, 09:03 AM

So I built a home made plane using all brand new electronics about a year or so ago. It has the ar6400 that I programmed to use an external esc. The motor is an AP05 from hobby city, the esc is a brushless 10 amp with a diode coming off the power wire to drop the voltage enough to run the ar6400. The fuse is a carbon fiber arrow. I flew it a time or two, and I don't have the right size elevator on it. The elevator needs to be smaller, and the horizontal stab needs to be bigger as it was a bit pitch sensative. I then put it on a shelf where it has sat ever since. I have got $95 in it all new, I am asking $60 shipped. It is set up for a two cell lipo around 400 milamp.

chyorn · Jan 10, 2013, 09:17 AM

ws is 28 inches and 24 long

jimmbo · Jan 10, 2013, 12:21 PM

PM sent

chyorn · Jan 13, 2013, 06:21 PM

Bump

Any takers? Anyone out there? Did I mention it is brand new stuff???

nemoskull · Jan 14, 2013, 07:04 PM

entire planes are a hard sell if not used. you might get more selling the guts.

Jan 10, 2013, 09:03 AM	#1
chyorn Adam Stallcup Forsyth Mo Joined Jan 2008 42 Posts Trader Rating: 70	flying homebuilt So I built a home made plane using all brand new electronics about a year or so ago. It has the ar6400 that I programmed to use an external esc. The motor is an AP05 from hobby city, the esc is a brushless 10 amp with a diode coming off the power wire to drop the voltage enough to run the ar6400. The fuse is a carbon fiber arrow. I flew it a time or two, and I don't have the right size elevator on it. The elevator needs to be smaller, and the horizontal stab needs to be bigger as it was a bit pitch sensative. I then put it on a shelf where it has sat ever since. I have got $95 in it all new, I am asking $60 shipped. It is set up for a two cell lipo around 400 milamp. Images View all Images in thread Views: 218 Views: 107 Views: 85

Jan 10, 2013, 09:17 AM	#2
chyorn Adam Stallcup Forsyth Mo Joined Jan 2008 42 Posts Trader Rating: 70	size ws is 28 inches and 24 long

Jan 13, 2013, 06:21 PM	#4
chyorn Adam Stallcup Forsyth Mo Joined Jan 2008 42 Posts Trader Rating: 70	bump Bump Any takers? Anyone out there? Did I mention it is brand new stuff???

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Discussion $TREE and FFF Homebuilt FPV pusher ideas	chanyote66	Foamies (Scratchbuilt)	6	Dec 28, 2012 12:12 AM
Sold Variac for a Homebuilt Hotwire Cutter...	soarsimon	Aircraft - General - Miscellaneous (FS/W)	3	Jun 23, 2012 10:15 AM
Question Autopilot on a homebuilt plane?	koskok2695	3D Foamies	0	Mar 15, 2012 08:36 AM
Yippee! Vid of my 26" homebuilt flying wing	Hogster	Flying Wings	15	Jun 15, 2004 04:21 AM

Images

RCG Sites

About RCG

Features

Tools

Media

Topics

Jan 10, 2013, 12:21 PM	#3
jimmbo Registered User United States, CA, Irvine Joined Mar 2012 1 Posts Trader Rating: 21	PM sent

Jan 14, 2013, 07:04 PM	#5
nemoskull Pilot, Co-pilot, Navagator United States, AZ, Yuma Joined Sep 2009 2,651 Posts Trader Rating: 58	entire planes are a hard sell if not used. you might get more selling the guts.