It is here! http://www.3dhobbyshop.com/40-EPP-Edge_p_16186.html

Here are some pics.
http://3dhs40edgeepp.shutterfly.com/

If you listen to the video starting at 4:10 Joe is talking about the setup he is using in this video.

3D Hobby Shop 40" EDGE 540 EPP Fun pilot Joe Smith (4 min 57 sec)

Night flying videos:
http://www.youtube.com/watch?feature...&v=jKD3coF8sMg
http://www.youtube.com/watch?feature...&v=Hfttf_gY61o


Build Manual!
https://3dhobbyshop.3dcartstores.com...anualemail.pdf

Required Equipment:
Power System:

Omega 72g 1100KV Lightweight Setup
Use with 11x5.5 prop and 3S 1000-1600mah lipo.

Omega 103g 1030KV More Power Setup
Use with a 12x6 prop and 3S 1000-1600mah lipo.

ESC:
Use AirBoss 45A or Hacker X55 or Castle ICE Lite 50A.

Servos:
Qty. 4 Hitec HS-65MG
Servo Extensions:
Qty. 2 12 inchQty. 2 4 inch

Have fun and fly low!

Can't wait for this plane! Will most likely be getting one.

Same here, will be putting my old 42" slick guts in it, which are 103g omega, 4x hitec 65mg's, and hacker x-40. I would like to put a ice 50 in it but don't know yet.

Subbed! I'll be throwing my 42" gear into this if I can't sell it!

Originally Posted by Park_aviator

Subbed! I'll be throwing my 42" gear into this if I can't sell it!

Don't sell the gear, you sell it you know you probably won't get a 40" after that. So keep the gear and then for 100$ or less you will have another sweet plane and it's more crash proof than a balsa. I think this plane will be the new buck huck or maybe even 90$.

Originally Posted by skarface

Don't sell the gear, you sell it you know you probably won't get a 40" after that. So keep the gear and then for 100$ or less you will have another sweet plane and it's more crash proof than a balsa. I think this plane will be the new buck huck or maybe even 90$.

Thing is, I still have all my gear from my 41" Edge...

Originally Posted by Park_aviator

Thing is, I still have all my gear from my 41" Edge...

Oh well then your good to go. But I will be putting a 103g on this plane, so you should sell the 41" edge gear, keep the 42" slick gear.

Originally Posted by skarface

Oh well then your good to go. But I will be putting a 103g on this plane, so you should sell the 41" edge gear, keep the 42" slick gear.

Yeah, I want to do that, but no one wants to buy it.... I'm trying to sell my DX6i, 41" Edge electronics, and my 42" Slick since I bought a 51". This thread is already off topic because of us bro!

Haha maybe.

Definitely interested in this plane

ITS HERE!

http://www.3dhobbyshop.com/40-EPP-Edge_p_16186.html

Originally Posted by cale10

ITS HERE!

http://www.3dhobbyshop.com/40-EPP-Edge_p_16186.html

I know. I will update this page tomorrow.

Originally Posted by cale10

its here!

http://www.3dhobbyshop.com/40-epp-edge_p_16186.html

yes!

Originally Posted by cale10

ITS HERE!

http://www.3dhobbyshop.com/40-EPP-Edge_p_16186.html

Got my hopes up! I was hoping for a pre-order. Hopefully soon I am really looking forward to this plane. It will become my second night flier but with the Aurora kit I bought. Oh man need to calm down too excited!! Guess the next question is 72g or 103g. I think I am going to go 103g just to have the extra power. What are the max amps the 103g pulls?

I have the same problem too. 103g or 72g. Will the 103g be too heavy with an 1800mah battery?