|Nov 18, 2012, 08:46 AM|
>>FOUND<< 3.3v BEC/UBEC Wanted >>FOUND<<
I am looking for a 3.3v BEC/UBEC along the lines of the AEO 3.3V 3A UBEC. I am going to use it to power a DSM2 module in a Th9x. Don't need the connectors because I have to solder all of the wires anyway. Before sending the money to HP, I thought I would see if someone in the community could use it first.
If you have one lying around that you can let go, post or pm what and how much.
>> FOUND <<
|Nov 18, 2012, 12:27 PM|
Thanks nitrodude71, the only thing wrong with that is my application needs 3.3v out and that provides 5.8v or 5.1v.
I am going to be using a DX5e DSM2 transmitter module mounted in a regular 9x module. The module from the cheapie BNF controllers may work with the 3.3 off of the 9x board, but the DX4/5e module may draw too much power and cause brownout resetting. I have an LM317 and the components to make a voltage regulator, but a BEC/EBEC is a simpler and cleaner installation.
You have to er9x flashed on your radio; it not only changes the channel order to match DSM2, it also has the code to send out DSM2 compatible signals. I used a cheap USB programmer at first and then s_mack gave me a Smartie parts board (thanks again!!!) and that makes life a whole lot easier.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Help!||HK OSD not working with 3.3v Camera||Firepower||FPV Talk||0||Sep 02, 2012 02:51 AM|
|Wanted||3.3v usb>ftdi programming card||jy0933||Aircraft - Electric - Multirotor (FS/W)||4||Jul 20, 2012 10:51 PM|
|Discussion||Who Makes/Sells Quality/Reliable BEC's/UBEC's?||itsme2||Power Systems||5||Mar 17, 2012 11:27 AM|
|Discussion||Hobbyking 3.3v 3amp ubec||aeromaniac||Radios||4||Dec 25, 2011 08:40 PM|
|Question||Spectrum AR7000 on 3.3v BEC?||Oreo||Radios||3||Apr 25, 2007 02:07 AM|