|Aug 28, 2012, 01:54 PM|
Need a "Rule of thumb"
On prop position vs CG, as well as cg in general...is ballasting the kite for "free flight" test glides still valid?
I would guess that the prop position would change as a percentage of the chord depending on the type of kite...but I am not sure.
A buddy and I got out first vector unit together this weekend, and had a flight, though it wasn't 100% successful. We told the onlookers that "we are still in the development stage" to save face
So...any advice? We are not locked into a specific kite type, so if one is better than the other (delta. delta box, etc) we can change as needed...
|Aug 29, 2012, 11:52 AM|
I've always determined CG with glide tests for all my kites. So yes, it's valid.
However, I've found that kites with long wingspans and short body like bird kites to be harder to trim than kites with short wingspans and long bodies like deltas and box kites.
Kites with a lot of cloth in front of the CG usually need a tail to improve lateral and spiral stability. Sort of like the rule with planes and the size of vertical stabilizers.
So far I've never been able to trim kites with pusher configuration though it should be possible given that people have built RC ultralights. Having the prop in front of the CG is easier to trim in my experience.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||rule of thumb for kv of motor needed for wing?||Nethole||Flying Wings||6||Oct 27, 2006 02:21 PM|
|Discussion||need rules of thumb||birdofplay||Electric Motor Design and Construction||16||Mar 02, 2006 05:53 PM|
|confused..need watts vs weight rule of thumb please||Wayner||Power Systems||12||Dec 12, 2005 09:20 PM|
|Rule of Thumb?||Fast Fly||Sport Planes||3||Oct 09, 2001 12:01 PM|
|Rule of Thumbs.....||LuckyArmpit||Foamies (Kits)||1||Sep 30, 2001 10:00 PM|