SMALL - espritmodel.com SMALL - Telemetry SMALL - Radio
Reply
Thread Tools
Old Nov 18, 2012, 03:33 PM
DVE
Registered User
Russian Federation, Sankt-Petersburg, SPB
Joined Jul 2011
578 Posts
Ok, thanks, I'll check results again.

Is it critical to freeze board to -18, if I'm not planning to fly at this temperatures? -10..+20 range for me may be enough, even -5...
DVE is offline Find More Posts by DVE
Reply With Quote
Sign up now
to remove ads between posts
Old Nov 18, 2012, 03:39 PM
Friend is a 4 letter word...
JussiH's Avatar
3rd stone from the sun
Joined May 2007
2,676 Posts
Quote:
Originally Posted by DVE View Post
Ok, thanks, I'll check results again.

Is it critical to freeze board to -18, if I'm not planning to fly at this temperatures? -10..+20 range for me may be enough.
If your card is very thin (<0,7mm) it can have problems making contact properly when inserted. If you put a piece of tape on the logo-side to make it 0.75-0.8mm thick, it will sit better in the slot and make better contact.

Sadly there is a lot of difference between the thickness of cards from different manufactorers. I have seen from 0.65 to 0.82 mm thickness.

There is also a small feathering spring on the slot itself that can be bent down to make the card make better contact:

http://autoquad.org/wiki/wiki/autoqu...c-calibration/

(scroll down, first note)

SD card specification states operating temp from -25C to 80C
JussiH is offline Find More Posts by JussiH
RCG Plus Member
Old Nov 18, 2012, 03:46 PM
DVE
Registered User
Russian Federation, Sankt-Petersburg, SPB
Joined Jul 2011
578 Posts
Thanks, I've read it, but my board is from the last batch, not "early beta", so I ignored this note.

Btw it will be nice, if it will be possible to import logs directly via flight controller, without replacing card in the card reader.
DVE is offline Find More Posts by DVE
Last edited by DVE; Nov 18, 2012 at 03:51 PM.
Reply With Quote
Old Nov 18, 2012, 03:55 PM
Friend is a 4 letter word...
JussiH's Avatar
3rd stone from the sun
Joined May 2007
2,676 Posts
Quote:
Originally Posted by DVE View Post
Thanks, I've read it, but my board is from the last batch, not "early beta", so I ignored this note.

Btw it will be nice, if it will be possible to import logs directly via flight controller, without replacing card in the card reader.
We still use the same SD card slot, and its not a problem with the reader but with card manufactorer tolerances. It still applies.

Dont hold your breath waiting for us to make a feature to read cards directly from the FC, its just not practical to do over a serial connection...and we are busy improving the featureset and documentation....
JussiH is offline Find More Posts by JussiH
RCG Plus Member
Old Nov 19, 2012, 10:49 AM
Registered User
noppita's Avatar
Joined Jul 2009
2,189 Posts
i just received my AQ completed set and going to install with my Octo frame.

new to this FC.
noppita is offline Find More Posts by noppita
Reply With Quote
Old Nov 19, 2012, 10:49 AM
Registered User
BelgiŽ, Vlaams Gewest, Evergem
Joined Nov 2011
738 Posts
Good luck have fun calibrating!
Jessestr is offline Find More Posts by Jessestr
Reply With Quote
Old Nov 19, 2012, 10:51 AM
Registered User
noppita's Avatar
Joined Jul 2009
2,189 Posts
i have the gps antenna and gps shield, but still confuse how to attach the gps antenna to the gps shield.

do i tape it down or glue the antenna to the gps shield?

the instruction tell me to solder a wire from antenna to the gps shield? but there is only one wire to connect from antenna to the AQ FC. or i have to use extra small wire to solder one end from gps antenna aluminum cage to the gps shield on the other wire end?

thank you
noppita is offline Find More Posts by noppita
Reply With Quote
Old Nov 19, 2012, 10:52 AM
Registered User
noppita's Avatar
Joined Jul 2009
2,189 Posts
Quote:
Originally Posted by Jessestr View Post
Good luck have fun calibrating!
what do you mean? this board has problem with calibrating?

what kind of problem? can you take time to explain.
noppita is offline Find More Posts by noppita
Reply With Quote
Old Nov 19, 2012, 12:58 PM
Registered User
United States, KY, Morehead
Joined Jan 2005
155 Posts
The AQ6 does not have a problem calibrating its just a lengthy process
http://autoquad.org/wiki/wiki/autoquad-calibrations/

If everything goes good be prepared to spend at least
6 Hours on static (freezing and thawing not much work involved just time)
5min to hours?? on “Calibso” Dance (you have to practice a few times to get the hang of it)
10-20 hours number crunching on computer calculations (really depends on speed of your computer)

Then your board is ready to upload the new parameters and hopefully there is not much more tweaking.
skew is offline Find More Posts by skew
Reply With Quote
Old Nov 19, 2012, 01:24 PM
Registered User
BelgiŽ, Vlaams Gewest, Evergem
Joined Nov 2011
738 Posts
Thanks skew for catching up. Didn't want to scare you noppita. I think the calibration is "fun" it's just nice to see the data And you don't have to do anything ...

Build your frame when it's calibrating
Or learn the calibso dance.
Jessestr is offline Find More Posts by Jessestr
Reply With Quote
Old Nov 19, 2012, 06:55 PM
Registered User
Italy, Marche, Mondolfo
Joined Mar 2012
68 Posts
the main weakness of autoquad and also its main point of strength is the calibration itself...

if you get it right... then your platform is stable as nothing else

but before the happiness you have to spill some tears...
gionag is offline Find More Posts by gionag
Reply With Quote
Old Nov 19, 2012, 07:31 PM
uavservices on MRF
saabguyspg's Avatar
Calgary Canada
Joined Jun 2006
5,100 Posts
stable like nothing else....

what would be your experiance to compare this to? Mikrokopter?

I would imagine it's possible to be as good as MK if running I2C es'cs... but just flashed pwm?.. no chance.

Steve
saabguyspg is online now Find More Posts by saabguyspg
Reply With Quote
Old Nov 19, 2012, 07:36 PM
Registered User
Italy, Marche, Mondolfo
Joined Mar 2012
68 Posts
have you tested AQ ?

the esc is the top of the iceberg... there are many other things to put into account.

and in my experience, i don't go think i2c makes this huge difference... only a very critical point of failure.

now i'm flying with ESC32 and the Aq with r37 dev firmware... i don't think to put back the MK fc for now...

but this is only my two cents.
gionag is offline Find More Posts by gionag
Reply With Quote
Old Nov 19, 2012, 08:27 PM
Registered User
noppita's Avatar
Joined Jul 2009
2,189 Posts
Quote:
Originally Posted by saabguyspg View Post
stable like nothing else....

what would be your experiance to compare this to? Mikrokopter?

I would imagine it's possible to be as good as MK if running I2C es'cs... but just flashed pwm?.. no chance.

Steve


From my experienced, normal esc with simonk firmware is as good as i2c esc on both arducopter and MK.
noppita is offline Find More Posts by noppita
Reply With Quote
Old Nov 20, 2012, 03:40 AM
OS Sponsor
kinderkram's Avatar
Germany, NRW, Dusseldorf
Joined Jun 2010
5,316 Posts
Quote:
Originally Posted by gionag View Post
the main weakness of autoquad and also its main point of strength is the calibration itself...

if you get it right... then your platform is stable as nothing else

but before the happiness you have to spill some tears...
Yah, most users don't like the calibration process.
The positive outcome: you will learn a lot about your FC and the sensors - you'll know it inside out then.

There are plans to offer pre-calibrated boards and RTF/ARF setups. So the user only has to do some minor tuning to match his airframe.
kinderkram is offline Find More Posts by kinderkram
RCG Plus Member
Reply With Quote
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Autoquad team proudly presents: Autoquad ESC32 JussiH Multirotor Electronics 274 Oct 31, 2014 11:19 AM
Discussion Naza dji sh gps - south hemisphere public beta testers results! Velociraptor73 Multirotor Talk 26 Nov 20, 2012 02:45 AM
Discussion How Bloomberg's Soft Drink Ban Will Backfire on NYC Public Health MtnGoat Life, The Universe, and Politics 1 Jun 27, 2012 12:19 AM
Discussion The AutoQuad! [ video ] kapteinkuk Multirotor Talk 5 Jun 10, 2012 12:19 PM
Download G-3 Public Beta (.426) is out. Includes Airplane Importer! L0stS0ul Simulators 37 Mar 03, 2006 06:28 PM