HobbyKing.com New Products Flash Sale
Reply
Thread Tools
Old Jun 29, 2014, 01:29 PM
Cambridge
Joined Sep 2005
668 Posts
Alert
Marksu MX 300 & Sergey 6S with 8.25:1

Sergey 6S motor with 8.25:1 & Markus MX300 Controller (Also new caps as spares) - 320 or 400 (Post and insurance at cost)

Motor
520 grams = weight of motor+ESC
14.7V -> 8.3A will be the no load current at the voltage it accors
4480 KV - With 8.25 gearing that would be about the same as a 3665 KV motor with 6.75 gearing

Markus

- cut-off voltage 5.0V, 6.0 V, 9.0 V, 12.0 V, 15.0 V, 18.0V, "off", "auto NiXX", "Custom"
- brake type 4 settings
- timing - 3-7-12-17-22-27
- acceleration - 3 settings
- start - 4 settings
- throttle curve "exponential" or "linear"
- cutoff type - "acro" or "heli"
- switching frequency 8 KHz or 16 KHz
- change rotation direction 2 settings
- audible and LED signal is lost or radio interference becomes severe 2 settings
- calibrating endpoints (maximizes usable stick travel)
- return to default settings
- auto shut down when signal is lost or radio interference becomes severe
- audible and LED signal
- extremely low resistance - 0,00036 ohms
- recommended for use with all types of brushless motors with the power up to 7500 watt
Alan Flockhart is offline Find More Posts by Alan Flockhart
Reply With Quote
Sign up now
to remove ads between posts
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Wanted Wanted: 1/10, 1/8 trade for 6s 60c 5000mah bats Fastest3 Cars - Trucks and Parts (FS/W) 4 Apr 11, 2014 08:20 AM
Sold bad Nano 1,300 6s packs itsmillertime Aircraft - Electric - Batteries & Chargers (FS/W) 1 Oct 28, 2013 11:11 PM
For Sale Midwest Extra 300 with Moki 1.8 RTF spitfire1999 Aircraft - Fuel - Airplanes (FS/W) 3 Aug 12, 2011 03:33 PM
Sold 2 8 cell packs 1 8x1700 Sanyo Nicad 1 8 x 300 NiMH - Cheap! Twmaster Aircraft - Electric - Batteries & Chargers (FS/W) 5 Oct 14, 2008 12:48 PM
Sold Jammin X1 CR 1/8 buggy with RB motor $300 shipped!!! lincpimp Cars - Cars and Parts (FS/W) 2 Sep 09, 2008 02:25 PM