F22 in MPF a 1 sheeter
For some time now I have been offering Ottos'
Giant F22 scaled down to 9mm Depron at around 36" span.
Now that Depron is no longer available
I have scaled it back a little more to fit on ONE SHEET of MPF !
I've never flown an F22 foamy that was not a great flier.
Free plans below in a 24 x 48 Pdf.
Although I have not tried to skin it yet I have developed Skins for the front Top and Bottom sides.
Those can be seen in my CAD Screen grab and in the pdf I've furnished.
Pix are just above that PDF
This will be available on my site for a reasonable price as MPF is cheaper than Depron.
If there is interest in the Skinned Canopy and nose parts
I will make them available as well.
Best of luck with your builds and maiden.
Hoosier Cutout Service
I fly mine at the wing fuse breakor a little further back.
But be aware that an aft cg might not react as well "Motor Off" as it does "Motor On"
because of the thrust vectoring effect we get with power on.
I've found this characteristic on a lot of my Prop In Slot Jets.
F-15, F-22, Mig29
My 1st indication of this was when gliding in for a landing it did not want to turn to
the base leg. A little power and it came around.
Lately I figure just leave some power on even when landing.
They slow up quickly IMHO so avoid the drama with a little power.
I'd enjoy some pix of your build and a vid , if possible, of a flight.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Build Log||MPF Drak 48||XDmToter||Foamies (Scratchbuilt)||38||Aug 18, 2016 08:42 PM|
|Discussion||1/22 Sukhoi Su-34 Fullback (6mm MPF)||thunderai||Pusher Prop Jet Models||11||Jul 10, 2016 06:33 PM|
|Discussion||MDC F14 in MPF||birdofplay||Pusher Prop Jet Models||0||Jul 05, 2016 12:15 PM|
|Discussion||OneSheetRacer - One Sheeter#7 is a half sheeter....||springer||Foamies (Scratchbuilt)||93||Mar 24, 2016 03:59 PM|
|Sold||Two more F22 I find in storage||1moparman1||Aircraft - Electric - Jets (FS/W)||10||Jan 13, 2016 10:00 AM|