|Apr 26, 2013, 12:58 PM|
Fuse options for my next project
I'm interested in trying a zone wing after a few years with the Blaster 3.
Option I - Just order a NEO with Swindel tails and get on with it
Option 2 - Ask Seba to build me a custom wing adapted to a Blaster 3 or similar fuse with Swindel tails
I really prefer all servos in the fuse for a variety of reasons. For option II can anyone recommend a one-piece fuse that supports all internal servos (wing servos in fuse, as in the Blaster). My current plan is a visit to Barry and Snickers to pickup a second Blaster fuse and begin bashing....
I bet someone has done this....
Talk amonst yourselves
Dan in Dallas
|Apr 26, 2013, 01:26 PM|
United States, MD, Lusby
Joined Nov 2003
Order a NEOS.
If you insist you can get four servos in an Adam Zone v2 fuselage easily. Trouble is I only have 1 left. And you'd have to buy an Aurora ZV2 wing to match.
|Apr 26, 2013, 02:44 PM|
|Apr 26, 2013, 04:17 PM|
USA, TX, Mansfield
Joined Aug 2004
|Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion Possible frames or ARF options for a Senior Project||njfife||Electric Plane Talk||3||Apr 24, 2013 10:24 PM|
|Discussion what to get for my next edf?||Plummet Airlines||Foamy EDFs||10||Apr 17, 2013 09:57 PM|
|Discussion Setting up dual rates for my next flyer||Sabin||Electric Plane Talk||3||Apr 11, 2013 09:34 PM|
|Question Is better KK2 or CC3D for next quad/trico project?||Pozzix||Multirotor Electronics||2||Apr 08, 2013 02:43 PM|
|Discussion My next project||Damuelson||Scratchbuilt Multirotors||0||Jan 28, 2013 01:26 PM|