Originally Posted by medic45

Hey Kevin can u link them??? I've not bought from hk yet and not sure which ones I get

Sure---Here ya go...

http://www.hobbyking.com/hobbyking/s...arehouse_.html

Kevin

Originally Posted by Kevin Greene

I'm buying my NanoTechs from Hobby King's USA warehouse...I just bought another 1/2 dozen...Less than $30 SHIPPED via Priority Mail!!!

Kevin

Got a Buddy Code to share???

Originally Posted by Kevin Greene

Sure---Here ya go...
http://www.hobbyking.com/hobbyking/s...arehouse_.html
Kevin

Does that battery connect directly to the S3D through the battery's balance plug?

(No adapter needed?)

Originally Posted by pugsam

Does that battery connect directly to the S3D through the battery's balance plug?

(No adapter needed?)

No. those do not connect at all. these Batts are designed the the micro series.
http://www.hobbyking.com/hobbyking/s...mpatible_.html

Originally Posted by Airman74

Here's first radar readings straight from memory of pocket radar
37
39
40
38
41

Do you happen to know the speeds of the Sbach Ver 1?

Originally Posted by turboparker

RC,

My V1 is still going strong on 3s, as well. Definitely a lot faster than the Mig! In fact, I'd say that it can climb straight up about as fast as the Mig can fly straight & level @ WOT. When flying at the club field, I can keep up with most of the larger planes in the pattern.

So, are you going to try 3s in your S3D?

Joel

Hey Joel,

For me, 3S is a necessity now.
No going back.

If my Sbach 3D doesn't like 3S power, I'll give it an attitude adjustment.

rc

Originally Posted by pugsam

Does that battery connect directly to the S3D through the battery's balance plug?

(No adapter needed?)

You need to use this adapter, or solder your own using just the two power leads and you can charge/balance with theincluded 2S JST-XH lead. E-Flite UMX= JST-PH (combined power/balance lead)

http://www.rc-connectors.com/index.p...teektdaoekt5f2

I have a question. Having always put servo protectors on since the first beast came out and as even the high wing CC has servo covers, I was surprised to find that the new Sbach did not have any. Is there some reason? I am in the process of putting some on, but baffled by why there were none furnished. Maybe they are perceived to be a problem?

Originally Posted by Maddog20

Do you happen to know the speeds of the Sbach Ver 1?

Nope never owned a V1

Originally Posted by Kevin Greene

Sure---Here ya go...

http://www.hobbyking.com/hobbyking/s...arehouse_.html

Kevin

bro, have you tried the 45/90c packs?
I have one other place to try and find one of these V2 planes and off the the field with my Bushnell for some speed runs

Originally Posted by GassPasser

No. those do not connect at all. these Batts are designed the the micro series.
http://www.hobbyking.com/hobbyking/s...mpatible_.html

I just ordered 5 of these for my Sbach 3D. Do they really make that much of a difference compared to the E flite 200 mah 25c??
This new Sbach is quickly becoming my new Fav !!! Completey lost interest in my beast 3D,,, anyone Wana buy a BEAST 3d ??? :-)
On first few flights of Sbach 3D set timer at 4:00 min,, put back on charger they only took about 100 mah to fill again, waaay better than my beast. IMHO this new Sbach waaaaay better flying than beast 3D,,, others may not agree with me on this one I realize. So any takers for a Beast 3D never been crashed for $50??

Originally Posted by GassPasser

No. those do not connect at all. these Batts are designed the the micro series.
http://www.hobbyking.com/hobbyking/s...mpatible_.html

Originally Posted by brushless55

bro, have you tried the 45/90c packs?
I have one other place to try and find one of these V2 planes and off the the field with my Bushnell for some speed runs

What size are those 45c packs??? 260? 300??

Originally Posted by Airman74

I just ordered 5 of these for my Sbach 3D. Do they really make that much of a difference compared to the E flite 200 mah 25c??
This new Sbach is quickly becoming my new Fav !!! Completey lost interest in my beast 3D,,, anyone Wana buy a BEAST 3d ??? :-)
On first few flights of Sbach 3D set timer at 4:00 min,, put back on charger they only took about 100 mah to fill again, waaay better than my beast. IMHO this new Sbach waaaaay better flying than beast 3D,,, others may not agree with me on this one I realize. So any takers for a Beast 3D never been crashed for $50??

Sure I will tale it!

Originally Posted by Kevin Greene

You can get them at HK in the USA warehouse for about $3.80 each...(I'm a platinum member so your price may be more)...What a bargain!!!...They weigh the same as my Hyperion 240 25C batts----But the NanoTechs are putting out about 400 more RPM over my Hyperions....I also flew my 350mAh TPbatts and they measured the same RPM figures as my Hyperions..I'm REALLY happy with these new NanoTechs...I own 10 240mAh Hyperion batts, 4 325mAH TP batts and 2 350mAh TP batts...These NanoTechs are kicking ALL of their arses!!!......

Kevin

just picked up 6 for less than $30 shipped!
they have some 45/90c packs, have you tried these
little bigger packs not sure how much I'll have to cut to fit those 45c packs
and I'm sure this will be everyones FAV micro as my V1 was and still is my favorite UM right now
much more than my as3x Spit, sucker is just to slow

Originally Posted by Airman74

What size are those 45c packs??? 260? 300??

300's