HobbyKing.com New Products Flash Sale
Reply
Thread Tools
This thread is privately moderated by JimDrew, who may elect to delete unwanted replies.
Old Apr 05, 2014, 11:09 AM
Xtreme Power Systems
Lake Havasu, AZ
Joined Jun 2005
15,508 Posts
I use Artic Silver SCCE. This is a slow cure ceramic epoxy with very good W/mēK rating. But, more importantly is its high temperature handling. CPUs and such don't get to hundreds of degrees like a heat sink can with ESCs. The ceramic handles the heat transfer perfectly. Being ceramic, it's not electrically conductive at all. So, there is no danger of accidentally getting some on a PCB causing an issue.
JimDrew is offline Find More Posts by JimDrew
RCG Plus Member
Reply With Quote
Sign up now
to remove ads between posts
Old Apr 05, 2014, 12:08 PM
↓↘→ + (punch)
theKM's Avatar
central PA.
Joined Sep 2004
19,937 Posts
a second for Arctic Silver. it's rather awesome.
theKM is offline Find More Posts by theKM
Reply With Quote
Old Apr 19, 2014, 04:20 PM
Xtreme Power Systems
Lake Havasu, AZ
Joined Jun 2005
15,508 Posts
New updater (updater45.exe) has been released! Includes new firmware for the Nano, Nano II, RFU, and X10+ to support long frame rates used by radios using PPM data with more than 12 channels.

Nano II also now uses the port based outputs instead of channel based outputs. This means that every output can be reversed and/or have an offset position from center.

Changes made for all updates is available on the downloads page, located here:

http://www.xtremepowersystems.net/xd...are%20Upgrades

Don't forget that you need to perform a RESET a device has had its firmware updated!
JimDrew is offline Find More Posts by JimDrew
RCG Plus Member
Last edited by JimDrew; Apr 22, 2014 at 02:02 PM.
Reply With Quote
Old Apr 19, 2014, 06:06 PM
Registered User
The Villages, Florida
Joined May 2003
362 Posts
Quote:
Originally Posted by JimDrew View Post
New updater (updater45.exe) has been released! Includes new firmware for the Nano, Nano II, RFU, and X10+ to support long frame rates used by radios using PPM data with more than 12 channels.

Nano II also now uses the port based outputs instead of channel based outputs. This means that every output can be reversed and/or have an offset position from center.

Changes made for all updates is available on the downloads page, located here:

http://www.xtremepowersystems.net/xd...are%20Upgrades
Jim,

You're the best ! Nice work.....
JuanRodriguez is offline Find More Posts by JuanRodriguez
Reply With Quote
Reply


Thread Tools