|Jul 20, 2009, 10:47 PM|
United States, OK, Ardmore
Joined Sep 2007
Making a plane larger or smaller
If I wanter to make a airplane 25%,50% and 75% larger how would I do it.
Same thing for making one smaller.
I want to do the spadet LC-40 75% or even 50% smaller out of blue core FFF.
Thanks in advance.
|Jul 20, 2009, 11:36 PM|
Joined Mar 2005
First step is scaling the plans...
Take each meaurement and multiply by the scale factor.
(50% the scale factor is .5)
Second is determing the diffeences in structural needs due to the scale change.
EG if you were reducing the Spadet by to 75%, you would change the wing skins to 2 mm coro and would only reduce the spar height but not thickness. The fuselage plan would have to be in front of me for me to evaluate what other changes to make... the tailplanes would still be 4 mm coro.
This would be a .25 to .32 glow power (or equivilent electric power) model when done.
The changes being made would also need to take into consideration what power system you are putting in.
If you know the desired power system then you could choose the scale factor to fit it.... designing the airplane around the engine/motor.
|Jul 22, 2009, 04:24 PM|
There are a ton of sources there.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|.12 or smaller plane||Dorkhedeos||Fuel Plane Talk||14||May 13, 2005 07:16 PM|
|Props... larger or smaller?||naX||Beginner Training Area (Aircraft-Electric)||14||Jul 20, 2004 04:30 AM|
|Large dog comes within inches of making new plane a chew toy||tic||Electric Plane Talk||18||Jan 31, 2002 12:03 AM|
|making foamboard plane||TeddyTyler||Foamies (Kits)||6||Oct 01, 2001 11:50 AM|