|Dec 27, 2012, 09:00 PM|
Joined Dec 2012
Quadrotor power system
I am currently in the process of building a quad-rotor. I just wanted to check to see if these parts would work well together. Hobbyking support wasn't very helpful.
Any help is appreciated!
|Dec 28, 2012, 10:44 AM|
Your selected motor is totally overloaded with your selected prop and a 3S Lipo. The motor weight is
24 gram. A motor with 24 gram is able to handle about 24 gram * 3W/gram, that means an input power
of about 72 W. I would use your motor only with a 2S Lipo. In the attachment i have a calculation for a 2S and a 3S Lipo.
The input power of the motor is shaft power / (motor efficiency / 100). With 2S your quadrocopter will have a
max thrust of about 1.2 kg (2.6 lbs). That means that the AUW of your quadrocopter should not exceed 0.45 lbs
for a good performance.
|Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion Human powered quadrotor!||alevesque||Multirotor Talk||1||Sep 05, 2012 10:51 AM|
|Discussion DJI quadrotor stab system testing||sidneyw||Multirotor Talk||16||Jul 31, 2011 06:22 PM|
|Discussion Attempting to make an autonomous control system for my quadrotor||Reservation||FPV Talk||3||May 08, 2010 08:14 AM|
|Discussion help in chosing power system for Quadrotor.||brij||Power Systems||11||Feb 08, 2009 10:55 PM|
|Discussion help in chosing power system for Quadrotor.||brij||Power Systems||0||Jan 16, 2009 08:50 PM|