Originally Posted by Neil_SC
I have the Corsair with the 360kv motor and stock prop and on the ground it's pulling 2660W @ 115A! I am using a CC ICE100 though. The min voltage is 3.65v/cel, so the 6S-5300 30C packs are up for the job. I am a little worried about this much power and current on the FMS motor. It's difficult to check motor temps right after a flight. ESC comes down about 130F. I'm not that worried about the ICE100 but considering replacing it with an EDGE 130 this winter so I have a little more headroom. I have a Hacker A60-6XS 370kv motor that would do the 2600W no sweat but I can't fit the stock prop on it and I really want the stock prop.
I have similar setup, CC Phoenix EDGE 100 and 360kv. I took datalogs, and found high current only on takeoff. After that it was much lower, even in high-power manuevers. Details are in post #10202. In short, I didn't think i even needed a 100A ESC for this case (stock prop).