Originally Posted by lud

Mylar hinges / old 3.5" floppies cut suit to 1/2" square should be enough - cut a slot in the aileron & wing. slide em in level em up n then add a bit of thin CA.. it wicks down the hinge n sticks fast.

And they are exceptionally strong. Never had one fail.

Originally Posted by Rick F.

awesome advise thanks! wheres aplace i could get some of that tape?

Originally Posted by Bajora

4.00 or so a roll if you buy it at the hobby store under the DuBro brand. OR, buy a box of 12 direct from 3m and it costs like 22 bucks shipped.

This is also a reputable source for tape and glue.
http://www.rcfoam.com/index.php?cPat...395eaa0eced399

The foam-tac glue is also very useful. Same as UHU-Por or creative and cheaper... check out the glue section

Here is a link to the tape from 3M .... I sure bought a lot of this stuff at $4.00 + a roll from my LHS over the years. But getting it direct from 3M now is great!

http://www.shop3m.com/70200419342.html

Originally Posted by Bajora

Here is a link to the tape from 3M .... I sure bought a lot of this stuff at $4.00 + a roll from my LHS over the years. But getting it direct from 3M now is great!

http://www.shop3m.com/70200419342.html

+1 it works great.

Thanks, gonna get me some of that tape. Can't have enough supplies lying around, ya never know!

Is bananahobby the only place that will be selling the rare bear ? I live in the UK and get taxed heavily for anything over $40 from the US .

IF you have in interest in the rarebear - this link is a must read:

http://www.rarebear.com/rarebear/about_Rare_Bear/

Originally Posted by lud

IF you have in interest in the rarebear - this link is a must read:

http://www.rarebear.com/rarebear/about_Rare_Bear/

It is a very good story! I read through it as well....

Originally Posted by KRIS...

Is bananahobby the only place that will be selling the rare bear ? I live in the UK and get taxed heavily for anything over $40 from the US .

I posted the videos a little while back from a european website. Click on this link and then type in "nano" in search. All of the 50mm jets and mini warbirds will pop up.

http://at.robbe-online.net/rims_at.storefront/en

Originally Posted by gooniac33

I posted the videos a little while back from a european website. Click on this link and then type in "nano" in search. All of the 50mm jets and mini warbirds will pop up.

http://at.robbe-online.net/rims_at.storefront/en

Thanks gooniac your a star.

Is the Rare Bear Nano-Racer same as yours just in a diffent scheme ?cant find the brown and white rare bear also where is company based ?
Thanks

Originally Posted by KRIS...

Is the Rare Bear Nano-Racer same as yours just in a diffent scheme ?cant find the brown and white rare bear also where is company based ?
Thanks

The Nano-Racer is the same as the Mini Warbirds from Banana Hobby here in the US. The US kits are colored differently compared to the kits available in other countries. The actual manufacture is in China, and is called JPower.

Originally Posted by crazyj

The Nano-Racer is the same as the Mini Warbirds from Banana Hobby here in the US. The US kits are colored differently compared to the kits available in other countries. The actual manufacture is in China, and is called JPower.

Yeah, I'm still convinced that we in the US got the weaker paint scheme in every case.

That's ok.. they're brilliant little planes. I'm hooked regardless of the paint scheme.

Originally Posted by MRGTX

Yeah, I'm still convinced that we in the US got the weaker paint scheme in every case.

That's ok.. they're brilliant little planes. I'm hooked regardless of the paint scheme.

I agree as well. I like the other schemes....

Agreed the The Nano-Racer scheme is A1.