|Feb 17, 2012, 11:36 AM|
PL8 and parallel charging
I must be overlooking a setting.
I have 4 6S 3300mah packs in parallel that I want to charge at 25A. I set my input power supply settings at 27A and with a 28V supply, it should easily be capable to charge at 25A to these packs (according to the online calculator).
My preset has:
Parallel Packs: 4P
Charge Amps: 6.25A (I'm assuming the PL8 will multiply # of packs by charge current.)
But the PL8 will only charge at 10A. It thinks that my single lipo is to charge at 2.5A.
What setting is wrong on my preset?
|Feb 17, 2012, 11:56 AM|
You need to use a preset with the words "High Power" in it. All the others are limited to max 10A charge current. Try that first. Let me know how you make out.
|Thread||Thread Starter||Forum||Replies||Last Post|
|Question 1S parallel charging (vs Serial Charging) with Cellpro Multi4||demiluk||Batteries and Chargers||30||Feb 08, 2012 07:55 PM|
|Discussion PL8 (V2) True Parallel Balance Charging?||HahnSolo||FMA Direct||5||Nov 24, 2011 10:14 PM|
|Discussion PL8 gets "tired" charging 6S||Stumblebee||FMA Direct||11||Nov 11, 2011 09:42 AM|
|Discussion Charging deep cycles with PL8, what settings?||RevToTheRedlin||Batteries and Chargers||2||May 12, 2011 07:41 PM|
|Question PL8 max charge current parallel 1S||zapadoo||FMA Direct||2||Jan 18, 2011 07:51 PM|