|Oct 22, 2012, 06:46 PM|
Here's a "work in progress" pic of my latest flyer. Not bad for 3h of work, design phase included. 10oz AUW, it's to use a pair of small 2S batteries that I never know what to do with... and to practice landings without damaging my nicer planes.
Hopefully next weekend will be nice!
UPDATE: Plane is completed, or at least enough for test flights. If it's a keeper, I'll tidy up the wiring and add more markings to it.
UPDATE 2: Whaddya know, it flies! Needs either some downthrust or a bit of down trim, and I need to change the prop, but otherwise it's a nice flyer. I can finally use those spare 2S batteries!
|Jan 11, 2013, 03:55 PM|
It's a good plane, albeit slow even at WOT (which is fine since it's a practice plane for landing). Not good as a general trainer because of the straight wing -- it was designed that way to force me to fly the plane down to the ground properly.
Very tough. I just bend the LG wire back into shape and take off again.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||3D Flyers, Heli Flyers, EDF Flyers and more||Vintauri||WATTS over Owatonna 2012||17||Jul 01, 2012 03:47 AM|
|Discussion||Please HELP - Charging 2s with Turnigy balancer & Charger 2S-3S||Pentatronik||Batteries and Chargers||4||Mar 10, 2012 09:33 PM|
|Poll||What is the best (2s) LiPo pack for a 7oz slow flyer?||m25||Electric Plane Talk||5||Jan 22, 2010 04:23 PM|
|Discussion||2s TowerPro Shock-Flyer||discoboy||Foamies (Kits)||1||Mar 11, 2006 03:11 PM|
|Shock Flyer - ETEC's -2S, 2S2P, or 3S 1200?||falconpilot||3D Flying||3||Apr 14, 2004 11:53 PM|