|Mar 23, 2013, 08:10 PM|
what can i use my um stryker electronics for?.
i have a pretty beat up ultra micro stryker and im looking for ideas as to what i can make with regards to a purely indoor 3d depron plane,the smaller the better as i want to practise prop hanging etc in my house.
all the electronics on the stryker are sound and i want to be able to use the servos,rx and possibly the motor and of course the numerous 2c batterys i have for it.
if anyone could offer suggestions (and ideally a link to the plans) as to which plane would be best suited to my needs and the components i have available id be very grateful.
|Mar 24, 2013, 01:51 PM|
Joined Sep 2004
I've got crashed Stryker guts as well.
I want to build a EPP 20/22" aerobatic parkflyer, about 2.5ozs.
I really think the Stryker motor is too hi Kv for a slower plane, so I'm going to use the HobbyKing 10g 2000Kv outrunner($8.00) 5x3 or 6x3 prop and will upgrade the aileron servos to the 2.3g's.
I've got a small Hacker Zoom coming to experiment with and will do a build Thread.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Help!||What kind of reciver i can use for?||pablo pinto||Thermal||0||Mar 13, 2013 09:02 PM|
|Sold||UM F-27Q Stryker 180 airframe w/o electronics.||Tim Wolff||Aircraft - Electric - Micro & Indoor Airplanes (FS/W)||2||Feb 17, 2013 08:20 PM|
|Discussion||Stryker F27 My mods I am considering||irelandchad||Flying Wings||3||Jan 03, 2013 02:31 AM|
|Discussion||What type of piant should I use for my Parkzone UM P-51?||WHYISPY||Scratchbuilt Indoor and Micro Models||3||Jul 27, 2012 10:41 AM|
|Discussion||have um 4 site electronics what can i use them for?||get dustd||3D Flying||8||Jan 03, 2011 05:21 PM|