|Dec 07, 2014, 09:56 PM|
2015 ARRIS Lander-X3 Multicopter Electric Retractable Landing Skid
ARRIS Lander-X3 is the newly released on the 2014 Christmas retractable landing skid by hobby-wing.com. The main feature of this landing skid is professional, safe, easy to use and nice looking. There are various retractable landing skid on the market now, when we design the ARRIS Lander-X3, we aims at providing a high quality and easy operation landing skid for our customers.
ARRIS is always concentrated on designing the items which related with the multi-rotors, such as the brushless gimbals, multicopter frame and brushless motors. On the basis of the market and the professional analysis of the product, we begin to design the ARRIS Lander-X3 landing skid. After many times of test and modification, the final ARRIS Lander-X3 retractable landing skid comes out.
As we all know, the retractable landing skid plays an important role on the multicopter during the FPV. If the landing skid could not put down to the low position during the landing, many of the equipments on the mutlicopter may damage. ARRIS Lander-X3 just comes out with this responsibility and it provides necessary safeguard for your flight. When we design the controller board and choose motor, the first and most important factor we consider is safety. ARRIS Lander-X3 get through our long time test with high load.
Easy to Use
Once you power it though 11.1V power, press the button on the controller board, it could retract or put down easily.
Of course, you can use your radio to control the fold or put down of the landing skid and the setting is very easy.
Unlike other servo retractable landing skid, there is no angle offset of the ARRIS Lander-X3, so the landing skid could fold to the proper position problem could not appear on ARRIS Lander X3, this avoid the complicate adjusting.
To install the ARRIS Lander-X3 to multicopter is very easy too. You can either mount it to the lower plate of the multicopter or on the motor arm. It supports 3 sizes of tubes now: 16mm, 22mm and 25mm.
ARRIS Lander-X3 controller board support 3 landing legs at most, provide more projects for customers on the landing skid.
ARRIS Lander-X3 adopts professional CNC processing and surface processing on the metal parts. The quality and appearance is really good.
Input voltage: DC 6V-22V
Stall Current: 1.8A
Max Working Current: 4A
Input Signal Pulse Width: 200US----2500US
(Landing skid put down to the low position: 300-1200/Landing skid fold up to high position: 1700-2500)
Weight: 235g(include 2 landing gears ,1 controller board and 2 T-joint connectors)
Dimension: (shown in the following picture)
|Dec 09, 2014, 08:50 PM|
Electronic Retractable Landing Gear x 2
Controler Board x 1
22x20x40MM carbon fiber tube x 2
10x8x50MM carbon fiber tube x 2
Metal 22mm/10mm T-joint x2
Landing Skid Sponge Absorber Protective Sleeve x4
M4 X 6MM screws x 4
M3 X 8MM screws x 2
Power cable x 1
signal wire x 1
2015 ARRIS Lander-X3 Multicopter Electric Retractable Landing Skid(Version B)
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||Tarot 650 Sport Quadcopter TL65S01 with Electric Retractable Landing Skid||myrcmodel||Multirotor Talk||2||Nov 25, 2014 05:54 AM|
|Sold||NEW PRICE RC Lander Large Metal Electric Retract Landing Gear||bwoollia||Aircraft - General - Miscellaneous (FS/W)||8||Oct 29, 2013 04:34 PM|
|Discussion||ARRIS Multicopter Retractable Landing Skid LD-01||nancy1987||Multirotor Talk||0||Sep 30, 2013 04:56 AM|