|Nov 09, 2011, 02:01 PM|
Turnigy 9x will not Stick Set
It was working and now its not. I followed the procedure in the manual just as I did when I first got it, and nothing. Anyone have a suggestion? In the programming you can set the stick config to 1,2,3,or 4 mode.
I use mode two. It will not switch away from mode 1. I had it set, and changed batteries out. now it will not change away. Is there a way to reset to default in the programming? I believe it is probably a software glitch.
|Nov 09, 2011, 05:45 PM|
Joined Jun 2005
Hold down menu key when turning on transmitter .
Also, when you select mode 2, press menu after, other wise it will not be saved .
|Nov 09, 2011, 07:37 PM|
"Mode 1" means "Model 1", it's just a typo. The radio holds 8 models, so you'll have "Mode 1" through "Mode 8". If I recall, it also says "Mode name" instead of "Model Name".
The screen where you change "Mode", as in Mode 1,2,3, or 4, is called "Stick Select" or something like that, not to be confused with "Mode Select" where you select which model (1-8) you want to fly.
|Thread||Thread Starter||Forum||Replies||Last Post|
|Help! Turnigy and Hobbywing ESCs will not arm||helipk||Power Systems||8||May 25, 2011 01:29 PM|
|Discussion Programmable transmitter (Turnigy 9x) Step-by-step set up||danda00||Electric Heli Talk||0||Feb 08, 2011 11:57 AM|
|Discussion Brand new Turnigy 6S will not balance after 10 cycles||cardinal43||Batteries and Chargers||133||Aug 08, 2010 05:45 AM|
|Help! Assigning ch4 to comething other than the left stick in a Turnigy 9x||sv650touring||Radios||0||Mar 31, 2010 11:39 AM|
|Discussion 735 SET will not track forward||karmann||Micro Helis||0||Dec 29, 2008 08:09 PM|