2WD Rustler (LCG Slash) + TX/RX $110 Shipped INCONUS
Almost Ready To Run: All it needs is your Charger
FS-GT3B Transmitter with receiver
It was my basher but its MECHANICALLY AND ELECTRONICALLY SOUND
Letting it go SUPER cheap, and not because it's a pile of crap! I'm currently a married college student in need of a little cash!
It drives straight and handles great when it has good tires for the surface it is being used on.
Cleaned and re-lubed Tranny and Diff last week
Body is beat to hell
Tires are bald
Transmitter finger trigger tip broke but was fixed with thread and epoxy. Works perfectly.
I extended it by cutting the chassis in half then used aluminum L-brackets top and bottom to brace it. Then I used a piece of aluminum Flat Bar to protect the battery from the ground. To fill the gap on the sides of the brackets and to prevent dirt/debris I added two plastic "tabs". Finally, I moved the waterproof receiver box to the front tower with Velcro since I lost one screw hole for the box to mount on the chassis by extending the chassis. It does not move or come undone. The battery is also secured using Velcro to remove it easier than using the factory body clip method. The battery does not moved or come undone.
TO MAKE IT A SLASH AND BRUSHLESS I INSTALLED:
HobbyKing Turnigy TrackStar 60Amp ESC
[Waterproofed ESC with Liquid Electrical Tape method (works beautifully)]
3900kv Brushless Motor
Traxxas Bearings all around
RPM Slash A-arms all around
RPM hub carriers all around
RPM Slash Body Posts all around
RPM Slash Front Bumper
Traxxas Slash Rear Bumper
Traxxas Red Springs in Back
(1) SPC 2cell 5000mah Lipo battery
(2) new Traxxas Battery Connectors
(2) Battery Charging Leads capable of charging (2) batteries each
Extra Set of Slash Rims
Spare RPM parts
Comes with factory Shock/Spring accessories, extra shock cap, and a bunch of other little parts, including extra screws, A-arm pins, body clips, etc...
Comes with factory "tool kit" to get you started if you don't have any tools
I pay PayPal fees -- It's $110 shipped to your door
Thanks for looking
Last edited by flyingpete; Jul 31, 2013 at 03:08 PM. Reason: Transmitter included
Sorry mk11kca, it does not. Just so you in know in the future--INCONUS stands for "In Continental United States". So that doesn't even include Alaska or Hawaii. I could get a shipping price for you though to see if it's worth it. PM me your address if your interested.
I did not receive a PM from you! Maybe you sent it to the wrong person somehow? I haven't deleted anything recently so I'm clueless on this one. I'm also PM'ing you this now.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Sold||Traxxas Slash LCG 2wd Roller with upgrades||noobiznessflying||Cars - Trucks and Parts (FS/W)||0||Mar 10, 2013 05:37 PM|
|Sold||New: Chuckworks Slash 2WD Slice B 3.5 LCG Chassis for sale||jafo216||Cars - Trucks and Parts (FS/W)||3||Feb 13, 2013 08:58 PM|
|Sold||Slash-Rustler BackBajr 2wd LCG||noobiznessflying||Cars - Trucks and Parts (FS/W)||5||Jan 23, 2013 02:35 PM|
|Sold||2wd STRC lcg slash RTR||mckolit||Cars - Trucks and Parts (FS/W)||5||Nov 09, 2012 10:07 AM|
|Wanted||1 R/C Apprentice Traxxas Slash 2WD, Carbon Fibre LCG Kit And Castle sidewinder 3800||HoldenV8Ute1||Cars - Trucks and Parts (FS/W)||0||May 22, 2012 05:09 AM|