|Feb 08, 2014, 07:19 PM|
Joined Jan 2010
Iam having trouble getting my stabilization operational.
THE PROBLEM IS THIS: After I have done everything Indicated....The ailerons move when the elevator should be moving and the elevator moves when the ailerons should be moving.
I am flying a 7 ft WING with OSD and V4 E logger and Stabilizer guardian
Yes..I have the controller set up as a standard wing and tail, to keep the controller from doing the mixing
I have one lead from channel #1(Aileron) on the controller going to Aileron IN on the OSD.
I have one lead from channel #2(Elevator) on the controller going to elevator IN on the OSD
I have a lead from one of the Aileron servos connected to the Aileron OUT on the OSD
I have a lead from the other Aileron servos connected to the elevator OUT on the OSD.
I have selected the elevon wing on the on screen monitor
Then I ran the servo analysis wizard
Then I turned on the stabilization /elevon mixing
What Happens: When I do a right turn with the controller...both ailerons go down
When I do a Left turn with the controller ....both ailerons go up
When I move the stick down ... The right aileron goes up and the left aileron goes down
When I move the stick up....The right aileron goes down and the left aileron goes up
When I pickup the plane and tilt the nose down the ailerons do move or when I tilt the plane sideway the ailerons move...BUT not nescessarily in the right direction
PLEASE REMEMBER BEFORE YOU ANSWER THAT THIS IS A WING WITH AILERONS ONLY.
|Feb 08, 2014, 10:07 PM|
It looks like you changed the configuration after you ran servo analysis wizard.
try running the wizard again.
Just for good measure, your transmitter should be set at standard airframe type, and your osd should be set for elevon.
after you run servo analysis wizard, if the problem persists, then switch the inputs from channel 1 and 2, and run the wizard again. That should take care of it.
|Feb 09, 2014, 07:55 AM|
it may happen that after this action the deflections are on the wrong side. then you have to reverse the servo running direction on your transmitter.
when all deflections are o.k. rerun the servo analysis wizzard.
|Feb 09, 2014, 08:39 AM|
can someone tell me what this means (Controller)
|Feb 09, 2014, 07:44 PM|
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|New Product||OSD PRO from Eagle Tree (RTH, AHI, Waypoints, Variometer, Voice, now shipping)||billpa||FPV Equipment||11196||Today 08:06 PM|
|New Product||OSD from Eagle Tree with logging/Google Earth support||billpa||FPV Talk||552||Apr 28, 2009 12:21 PM|
|Discussion||New Video On-Screen Display (OSD) Expander from Eagle Tree - $44.99||billpa||Aerial Photography||0||Jun 08, 2008 10:30 AM|
|Pro Data Acquisition Systems now available from Eagle Tree||billpa||Product Announcements||0||Aug 02, 2005 12:56 PM|
|New USB data logger accessories and Holiday specials from Eagle Tree Systems||billpa||Product Announcements||0||Nov 08, 2003 12:51 PM|