SMALL - espritmodel.com SMALL - Telemetry SMALL - Radio
Reply
Thread Tools
Old Jan 14, 2014, 06:20 PM
Registered User
soccerj4y's Avatar
United States, VA, Chesapeake
Joined Aug 2013
335 Posts
Discussion
Dynam E-razor 250

hey guys i just received this in a trade and after replacing the tail servo and setting up the gyro the blade tracking is a little off. Its about 5mm but i dont think that is flyable i have done the two part balance (cg and weight balancing) so that isnt the issue, but the problem is the dynam parts are only available at xheli and for a $1.38 feathering shaft set i have to pay like $9 in shipping and thats way too much....what parts are interchangeable from the trex 250 or hk250 that i could use as a feathering shaft or even parts in general. I have some spares but not too many.

Also i was wondering ho well this will fly 3d in original flybarred state? i can do 3d with my blade micros but id like a little more stability and im wondering if this will cut it.
soccerj4y is offline Find More Posts by soccerj4y
Last edited by soccerj4y; Jan 14, 2014 at 06:33 PM.
Reply With Quote
Sign up now
to remove ads between posts
Old Jan 15, 2014, 05:27 PM
Registered User
soccerj4y's Avatar
United States, VA, Chesapeake
Joined Aug 2013
335 Posts
No one?
soccerj4y is offline Find More Posts by soccerj4y
Reply With Quote
Old Jan 18, 2014, 08:42 AM
Registered User
soccerj4y's Avatar
United States, VA, Chesapeake
Joined Aug 2013
335 Posts
any one there?
soccerj4y is offline Find More Posts by soccerj4y
Reply With Quote
Old Jan 18, 2014, 11:34 AM
Registered User
United States, FL, Jacksonville
Joined Jan 2013
159 Posts
The align or hk feathering shaft is 2.5mm in diameter by 30.8mm in length. Compare that to what you have for the erazor. I have not flown the erazor but from looking at the specs, it'll do mild 3d no problem. I have an align 250 with the same motor/battery setup, thinking I would get a lighter heli, it's lighter but underpowered for extreme 3d.
SysCrusher is online now Find More Posts by SysCrusher
Reply With Quote
Old Jan 18, 2014, 12:10 PM
Registered User
soccerj4y's Avatar
United States, VA, Chesapeake
Joined Aug 2013
335 Posts
Quote:
Originally Posted by SysCrusher View Post
The align or hk feathering shaft is 2.5mm in diameter by 30.8mm in length. Compare that to what you have for the erazor. I have not flown the erazor but from looking at the specs, it'll do mild 3d no problem. I have an align 250 with the same motor/battery setup, thinking I would get a lighter heli, it's lighter but underpowered for extreme 3d.

Thanks I'll check at home but im on my way to the LHS and i brought it along to see if any thy have in stock match it...and i mostly (when flying my micro beasts) do mild-medium 3d: flips, loops, invert hovers, some inverted forward flight etc...no piroflips, hurricanes, ir funnels yet
soccerj4y is offline Find More Posts by soccerj4y
Reply With Quote
Old Jan 18, 2014, 01:45 PM
Registered User
soccerj4y's Avatar
United States, VA, Chesapeake
Joined Aug 2013
335 Posts
For anyone else who's wondering the FS is the exact same as the trex 250 one
soccerj4y is offline Find More Posts by soccerj4y
Reply With Quote
Old Sep 05, 2014, 05:57 PM
Registered User
Joined Jun 2012
23 Posts
Thanks, building one now myself so this is helpful. Any other parts that interchange?
jermflux is offline Find More Posts by jermflux
Reply With Quote
Old Sep 05, 2014, 06:36 PM
Registered User
Tucson, Az
Joined Feb 2007
7,198 Posts
Guys are in wrong section. 250 is a micro , might get more replies in right section. Minis are 450's.
dankar04 is online now Find More Posts by dankar04
Reply With Quote
Old Sep 06, 2014, 07:08 PM
Registered User
soccerj4y's Avatar
United States, VA, Chesapeake
Joined Aug 2013
335 Posts
No micro for me is a heli with a motor driven tail

The dynam is a total POS and a waste of time unless u dont fly 3d, i gave it to my brother with a ton of parts and he traded it off for a nice drifter and made off way better than me giving it away would have

Now i have a trex 250 and a 300x which are awesome, 250 not flown yet but i dont think much will transfer i know i used an align feathering shaft, maybe main shaft too, idk i would classify dynam as "toy" in my book, just get a proper heli ad save your time
soccerj4y is offline Find More Posts by soccerj4y
Reply With Quote
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion 15% OFF New Dynam E-razor 250 carbon edition 6 Channel 2.4Ghz 3D RC Helicopter xheli Hot Online Deals 2 Nov 19, 2013 02:00 PM
Discussion Dynam E-Razor 250 kit Haxsaw Electric Heli Talk 9 Jan 20, 2011 02:33 PM
Discussion Dynam E Razor 250 - Anyone else got one ? iamDerrick Micro Helis 14 Nov 23, 2010 10:26 PM
Question Would exi 250 tail aseembly fit on Dynam E Razor 250? jcervantes11 Micro Helis 0 Oct 30, 2010 08:09 PM
Question Dynam E-Razor 250 Pro. to buy or not to buy? futabafreak Micro Helis 10 Aug 22, 2010 01:06 AM