D2822/14 Brushless Outrunner 1450kv
I'm trying to build a very light P-51...but one that has decent speed (40mph-50mph range). My build will be about 490 grams AUW
Here's the plane:
Here's the motor I want to put on it
Does anyone have this motor...and can you share experience- can it manage 6x4 or 7x4 and estimate thrust...
from the specs, I see it's
Dimensions: 22 x 28
Voltage: 7.2v~11.1v 2s~3s Lipoly
Shaft: 3.17mm Diameter
Max Watts: 160W
Suggested Propeller: 8x6(2s) 7x4.5(3s)
max watts is 160w,...so I'm thinking it will work fine...and should get me almost 1:1.5 power ratio...but I would rather hear it from rcg...we all know how HK power ratings are
my next thought would be this motor if the one above is too small on power...
but then I would have to get a bigger esc, bigger Lipo...etc.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Sold||bl-2208/14 1450kv brushless motor REDUCED||nitrodude71||Aircraft - Electric - Power Systems (FS/W)||11||May 15, 2011 07:03 PM|
|Sold||Turnigy TR 35-36A 1450kv Brushless Outrunner (Eq:2814||Mikey 68||Aircraft - Electric - Power Systems (FS/W)||1||Mar 06, 2010 07:14 PM|
|Sold||Suppo 2208/14 1450Kv $12.00 each||awayne||Aircraft - Electric - Power Systems (FS/W)||4||Sep 21, 2009 10:58 AM|
|Question||Prop choice for GAD F-5 and Suppo 2208/14 1450kv motor||Kmart||Power Systems||6||May 31, 2009 09:34 PM|
|Question||Prop choice for GAD F-5 and Suppo 2208/14 1450kv motor||Kmart||Pusher Prop Jet Models||0||May 28, 2009 08:26 PM|