


United States, OH, Troy
Joined Jan 2008
77 Posts

Discussion
Wing Shear, Bending and Spar Spreadsheet
I've been wondering how to calculate the shear loading and bending moments of a canteliever wing for a while, so I decided to look it up. I found a good paper and a helpful wikipedia article. I decided to make a spreadsheet to do the calculations for me. It determines the Limit Shear and Bending moments using the Schrenk elliptical approximation, then on the next spreadsheet you can design an Ibeam spar using the data. I also included several common building material strengths and had the spreadsheet determine if these materials were strong enough in bending moment for the spar at the given section points.
Its has some limitations mostly that you cannot tell what will happen when you use different materials for the spar caps and shear web. Also it doesn't determine if the spar is strong enough in shear, but it is my assumption that if it is strong enough in bending it should be strong enough in shear. Use: Place your aircraft information into the purple boxes. Go to the next spreadsheet and design your spar by changing the data in the purple boxes making sure the material you wish to build with can handle the stress. Paper: http://www.lightaircraftassociation....roximation.pdf Wikipedia: http://en.wikipedia.org/wiki/Second_...l_axis_theorem Scott 



France, Bretagne, Rennes
Joined Jul 2011
260 Posts

Thank you for posting this, unfortunately, I am not used to imperial units so didn't really inderstand the nitty gritty of the spreadsheet but the paper looks clear and concise.




collection of info on spar construction
http://ciurpita.tripod.com/rc/notes/compositeSpar.html 



I threw a little something t'gether a few years ago....
takes the planform, applies Schrenks, calculates the moment at multiple locations along the span, calculates the shear, calculates the shear web thickness based on material properties.. as well as spar cap thickness... 
Thread Tools  
Similar Threads  
Category  Thread  Thread Starter  Forum  Replies  Last Post 
Discussion  Seagull MXSR 91120 wing tube bending.  Nitro2Burn  Fuel Plane Talk  37  May 08, 2015 06:30 PM 
Question  Bending foam wings  muka  Beginner Training Area (AircraftElectric)  4  Feb 29, 2012 12:16 AM 
Discussion  Engineering school shear vrs bending moment  FlyVA  Multi Task F3X  8  Mar 01, 2011 06:13 AM 
Discussion  Wing bending  shear flow  capricorn  Modeling Science  28  May 25, 2010 12:55 PM 
Question  Is it a spar or is it a shear web?  BillO  Composites Fabrication  39  Nov 09, 2009 03:39 PM 