|May 21, 2005, 07:28 PM|
Anyone know about Cyclone wingeron?
Found this online, looks to be a Chinese made 72" wingeron crunchie. About $140 with shipping from Hong Kong
# Wing Span: 1841 mm(72.5 inch)
# Length: 1092 mm(43 inch)
# Wing Area: 426 sq in.
# Airfoil: Eppler-374
# Flying Weight: 907 g(32 oz.)
# Radio: 2 channel, 2 servo, Wingeron, elevator Flying condition: Slope (Package Included B-25 Soft carrying bag)
# High performance sailplane
# ARC-Ready-To Cover
# White Gel-coated Fiberglass fuselage
# Factory built foam balsa wing
# Wingeron control
# Hardware included
# Size: 1084X220X70 mm
|May 21, 2005, 09:04 PM|
I have one of these still in the box. Mine has an unpainted fuse, so the advertised one must be a later run.
I had 3 to choose from and the other two had warped wings. I doubt the wing sheeting is balsa, unless it is of some super hard variety that I have not seen before. The cores were probably not mated well to the TE stock before it was sheeted, because if you hold and use some light to cast shadows over the wing, you can see a dip on the top surface of the wing between the high point and the TE.
Having said all that, I still bought it anyway as I got it for a song and I will probably only use the fuse and cut a new wing for it. The hardware seemed decent, but it will probably require a fitout to confirm it.
Out of the box it is A/E only, but it should be easy to add R (Contender style) if need be.
|May 21, 2005, 10:00 PM|
That is another AMD pos. The original Cyclone was a Samuri copy. I assume SIG sent them a nastygram because the shape of the Vertical stab changed. AMD kits are notoriously poor quality. Warped wings are not uncommon, the wood sheeting (poplar I think or the worlds heaviest balsa) is not very consistant. You will get some that's very heavy and some that's light. Not a problem if the sheeting on both wings match but it oflten does not. I have flown a AMD Cyclone and that one flew pretty well. I Skyking RC Shrike is a better bet if you want a wingeron. Not quite as ARF but the quality is much better
|May 21, 2005, 10:41 PM|
|May 21, 2005, 10:48 PM|
So whats the point ?
TFLG is basically saying stay away from it and thats enough for me..
|May 21, 2005, 10:50 PM|
United States, MN, Minneapolis
Joined Dec 2002
I have two of these and 3 sets of wings...it took that many to come up with 2 sets.. warped, gum wood is what I think they use...haven't put em together yet..I suspect you will get what you pay for. I have a AMD 4 meter discus that was a true piece of crap and a real challenge to build...but that is another story.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Anyone know about LCD camera display ??||Richard Ingram||Aerial Photography||9||Oct 31, 2004 02:51 PM|
|Does anyone know about BERG receivers?||Chuck||Parkflyers||16||Dec 24, 2002 06:03 AM|
|Anyone know about the SIG pioneer series?||sky guy||Parkflyers||5||Mar 17, 2002 11:47 PM|
|Anyone know about the Electro Goofy from Hobby Lobby?||Speedfreak||Electric Sailplanes||1||Nov 20, 2001 11:44 PM|
|Anyone know about the new Schulze ISL 6-330 NiCd/NiMh/Lith Charger?||EFoil||Electric Plane Talk||3||Jul 24, 2001 08:08 PM|