Chris,

Received the metallic frame today. I left positive trader feedback.

Thanks, Jerry

Originally Posted by noahb

Chris, some of the props you have sent with the quads have little "fillets" between the blade and the hub. They also do not have the stamp FC on the other side of the prop like the himodels do. Can you tell me what kind or where you got those props from?

Thanks,
Larry

I get them from Taiwan Ebay. They look the same and they can be mismatched but the little o-rings adapters do not have the same outer diameter. O-rings cannot be mismatched. So slightly different, and different manufacturer, quite obviously.

Best,
Chris

Originally Posted by Phasor

Chris,

Received the metallic frame today. I left positive trader feedback.

Thanks, Jerry

Reciprocated. Thank you, good Sir.

Best,
Chris

Are these appropriate for the Armattan quads?
http://www.hobbyking.com/hobbyking/s...Rotation_.html

Originally Posted by rexless

Are these appropriate for the Armattan quads?
http://www.hobbyking.com/hobbyking/s...Rotation_.html

I think so. Someone else may confirm.

Here's my CNC 325. Anodized arms and center plates. It's awesome!!!!

Best,
Chris

Originally Posted by rexless

Are these appropriate for the Armattan quads?
http://www.hobbyking.com/hobbyking/s...Rotation_.html

Yup, i've used them.

Never had any issue with them, other than crash-damage

Be sure to get CW and CCW.

just got my shipped notice from Chris, shows the actual package and mail receipt, what excellent customer service, also just received 2 Gforce 2200mah/40c and a Frsky fasst receiver from Value Hobby, also some spare props on the way from tech69x.

Originally Posted by shafter

Yup, i've used them.
Never had any issue with them, other than crash-damage
Be sure to get CW and CCW.

Got it. Thanks!!!

Originally Posted by adrenahelin

just got my shipped notice from Chris, shows the actual package and mail receipt, what excellent customer service, also just received 2 Gforce 2200mah/40c and a Frsky fasst receiver from Value Hobby, also some spare props on the way from tech69x.

His customer service is so good, we're calling him the Nordstrom's of Taiwan.

When I didn't get the correct mix of props, Chris immediately e mailed me, and told me to buy the props I needed and send him a paypal invoice.

Then he added a few more dollars to take care of the Paypal hit.

Very good attention to both detail and his customers.

If my motors are rcx then shouldn't their label say rcx on them? Mine does not, and the rcx chris has in the pics definately say rcx so I'm just wondering.

Hello Chris,

Can you add me to the list for a Armattan CNC 355 (RXR, All Metal Look) with breakaway skids installed and a set of CNC skids on the side?

Thanks

Chris,

My DIY kits arrived and I left + feedback. I'm going to order new frames for all my Armattan quads but I think I'll wait until after the Holidays. I will go with the orange and black powder coated arms next time.

Thanks for everything and have a great Holiday season!

Jim

Originally Posted by joc1618

Hello Chris,

Can you add me to the list for a Armattan CNC 355 (RXR, All Metal Look) with breakaway skids installed and a set of CNC skids on the side?

Thanks

Hi,

Thanks for your interest.

I'm sorry to ask but this is your first post and you just joined the forum. Is your paypal verified and where would I be shipping this to?

Best,
Chris

Originally Posted by Creepy1

If my motors are rcx then shouldn't their label say rcx on them? Mine does not, and the rcx chris has in the pics definately say rcx so I'm just wondering.

Hi,

I placed an order for about 100 motors a while back and myrcmart had to get them right from the factory. They did not want to make me wait so they shipped right away and included the RCX stickers on the side for many of the motors. I did not apply the stickers as they are useless. See below.

Best,
Chris

Originally Posted by Jim Frahm

Chris,

My DIY kits arrived and I left + feedback. I'm going to order new frames for all my Armattan quads but I think I'll wait until after the Holidays. I will go with the orange and black powder coated arms next time.

Thanks for everything and have a great Holiday season!

Jim

All the best to you and yours, too. Thanks for the feedback. I happily did the same for you, Sir.

Chris