Originally Posted by partzee

Will you please post exactly how to do that? I have 1.2 on my KK2 but want to put 1.4 on.I just upgraded to a Win 7, 64 bit PC and I have IE 9 which is 32 bit.I cannot get the path right.I flashed from 1.1 to 1.2 with no problems on an old XP 32 bit machine but I no longer have it.Do I need Java 64 as well as 32?
Many thanks,partzee

Hi partzee,

Go to the control panel on your PC and make sure you have Java installed see attached pix if this helps...

If you do not see java instaled in your control pannel then download and instal from here...http://www.java.com/en/download/index.jsp

Barry

Originally Posted by pabmadi

DT750 motors? Flight time?

Clone dji 550mm Hex with DT700 motors with 10" props....3s3000mah lipo @ 7 min.full charge...

Originally Posted by Flying Barry

Hi partzee,

Go to the control panel on your PC and make sure you have Java installed see attached pix if this helps...

If you do not see java instaled in your control pannel then download and instal from here...http://www.java.com/en/download/index.jsp

Barry

Many thanks Barry,yes I have java 32 installed and when I try to open the command folder in Lazyzero's flash tool software I see a message that the path cannot be found.
partzee

Originally Posted by Rotorhead0207

if you noticed on each of them there are 2 bubble level vials epoxied to the upper plate and I use them when I'm setting the bird on the ground and getting ready for flight. I level them every time so no suprizes on take off. Trim settings stay the same and they take off nice and level, part of the reason I don't use self level. Each of them have over 200 flighs since this spring. I'm retired so I fly when ever I have a day where the weather permits.

I was just wondering what's that yellow thing on them and I can't make a close-up on your pix...so that's what they are,that's a very good idea and I might try that too.Thanks ! Have a safe flight always ....

So with all the hype, I decided to try 1.4 I never use SL even for fpv, but had to try it... Nice! I can see this making my fpv landings much smoother Well done KK/ALL who contributed! Thank you!

Originally Posted by partzee

Many thanks Barry,yes I have java 32 installed and when I try to open the command folder in Lazyzero's flash tool software I see a message that the path cannot be found.
partzee

OK then you have two options

1) Double click on the Java icon and go to the tab update and see if this works see attached if this helps.
2) Uninstal Java then reinstal

I have a Windows 7 64 bit laptop and it works fine on it.


Or have a look here: http://www.java.com/en/download/manual.jsp

Barry

I updated to Java 7, update 9 and now I get a Java error when I try to open the file.I only get a screen flash when I do the command folder now.
I'm sorry,I just don't get it.
Thanks a million for your help.
partzee

Originally Posted by partzee

I updated to Java 7, update 9 and now I get a Java error when I try to open the file.I only get a screen flash when I do the command folder now.
I'm sorry,I just don't get it.
Thanks a million for your help.
partzee

I've spent a few hrs myself with my new Windows 7 computer with also no success. I finally at work loaded it all on a XP computer and have it working now.

My story is very similar too yours and still no luck with windows 7. Is your usbasp loaded fine?

For some reason I think it may be the path it taking

Originally Posted by partzee

I updated to Java 7, update 9 and now I get a Java error when I try to open the file.I only get a screen flash when I do the command folder now.
I'm sorry,I just don't get it.
Thanks a million for your help.
partzee

most win7 user use firefox in 32bit... download Java 64bit HERE and install it, after u have finished installing close all your browsers and then try to open the "kkMulticopterFlashTool.cmd" file

Originally Posted by mrfliboy

I've spent a few hrs myself with my new Windows 7 computer with also no success. I finally at work loaded it all on a XP computer and have it working now.

My story is very similar too yours and still no luck with windows 7. Is your usbasp loaded fine?

For some reason I think it may be the path it taking

No,usbasp ,can't get driver. I don't see it at all in device mgr.
partzee

Hi Barry,

Whereabouts in Sydney are you??

Cheers,
Smithy.

Originally Posted by Flying Barry

Dead right there but i will see how it goes on my Tricopter today

Barry

Barry: I have mine on a tricopter and it is rock solid....

I get a hard on flying the darn thing... No pun intended.

Originally Posted by trinco

most win7 user use firefox in 32bit... download Java 64bit HERE and install it, after u have finished installing close all your browsers and then try to open the "kkMulticopterFlashTool.cmd" file

Now I get "The system cannot find the path specified" I hit any key and then try to open the flash tool folder and get the java error again.
I really appreciate you guys helping,I'm sure it's just "cockpit" trouble on my end but I'm at my wits end.
partzee

Originally Posted by LittleG

Barry: I have mine on a tricopter and it is rock solid....

I get a hard on flying the darn thing... No pun intended.

Hope i have the same problem

Barrry

Originally Posted by knobby1

Hi Barry,

Whereabouts in Sydney are you??

Cheers,
Smithy.

Sent you PM

Barry