|Aug 04, 2012, 01:15 PM|
Joined Jul 2012
Help with Paris MultiWii board please!
Hello people of the internet!
I could really use some help here. I've built an 8 rotor machine and have a Paris FC board (V2) as the brains but i'm having real problems configuring it and hoped someone could help shed light here.
I have the Arduino code uploaded, matching GUI on mac OSX with FDTi drivers installed. I'm using a FlySky TH9X with matched Rx (8ch). The FC board is connected to USB and shows power up with a green LED and bright white LED flashing slowly.
Rx is connected as such:
Ch1: Throttle and +/-
Ch5: Aux 1
Ch6: Aux 2
A Red LED in the Rx shows connectivity to the Tx when it's turned on. It's set to Acro mode and stick type 2 as indicated in the manual.
I start the GUI and should see Tx movements on screen. When I press start only the red Tx LED on the FTDi card flashes. Apparently both this and a green Rx LED should flash. The green LED does work as it flashes briefly on powerup.
I have tried 2 FTDi cards, different USB cables and using PC instead of Mac and still I have no luck.
PLEASE help if you can see what is wrong here?!
|Thread||Thread Starter||Forum||Replies||Last Post|
|For Sale MultiWii Paris Boards lot of 3: v4.o Gimbal, v3.0 Y6, v3.0 Quad X||nicnaimless||Aircraft - Electric - Multirotor (FS/W)||2||Jun 18, 2012 10:38 PM|
|Sold -paris 4.0 multiwii board with USB to FTDi program card. $105||imdone||Aircraft - Electric - Multirotor (FS/W)||17||Jan 17, 2012 10:14 PM|
|Help! paris v3 board and arduino multiwii||rcta15||Multirotor Talk||4||Nov 18, 2011 01:45 PM|
|For Sale Paris 4.0 Multiwii Board, 8xKDA 20-22L's, 5x Emax CF2822's||Adidas4275||Aircraft - Electric - Multirotor (FS/W)||4||Nov 14, 2011 09:03 PM|
|Sold MultiWii Paris Board||cfrogjump||Aircraft - Electric - Multirotor (FS/W)||6||May 22, 2011 01:56 PM|