|Mar 26, 2013, 06:39 PM|
Joined Feb 2013
MultiCopter wont work :(
i brought a multicopter with a multi wii board and gps
same board as this
ive set up all the ESC.
on the multiwii config all my readings are around 990 to 1950
Led 2 is on (green)
led 3 blue flashs ever few seconds
led 4 orange just stays on.
and the red and blue led by the mini usb is always on too.
i turn it on, set throttle to min, and move the rudder right, nothing changes on the board.
im not too good with the adruino programming.
anyone got a pre loaded config they could send me or any ideas why its not working?
|Mar 26, 2013, 07:25 PM|
load this first from ardiuno to the board
then check the gui for gps working(you will see gps flashing in the gui)
this configs the gps..
next you need upload this..
this is the flight firmware..
thats it, all codes are ready made just select com port on tools and correct board =
ardiuno mega 2560 or mega adk...
hit upload job done..
|Mar 26, 2013, 07:40 PM|
Joined Feb 2013
ARRRHHH props are spinning! its armed :O
wow 3 days it took haha. thanks alot. :'( just a little upset im not aloud to test it as it makes abit of noise inside at this time.
|Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion V959 camear wont work||frosti7||Mini Multirotors||6||Feb 22, 2013 11:40 AM|
|Help! Looking for Multicopter Pilot for contract work in Africa||Cohiba88||Multirotor Talk||5||Sep 30, 2012 08:06 AM|
|Discussion Goodluckbuy KK multicopter, one motor not working.||joechege||Multirotor Talk||0||Apr 23, 2012 03:58 PM|
|Discussion Mystery Cloud (aka pentium??) 30A work for multicopter?||V_Okto||Multirotor Talk||3||Dec 21, 2011 12:36 PM|
|Help! kk multicopter will not work.||godislamm||Multirotor Talk||19||Jun 18, 2011 02:24 PM|