|Oct 09, 2012, 07:27 AM|
Joined May 2008
Brushless ESC with reverse
I am looking for the smallest ESC which can handle a 700W motor/45A.
It needs to have reverse, but it also needs to have the reverse type that allows you to have the stick at full forward and when it goes to the middle it stops the motor, and then when its pulled to minimum the motor has full speed the opposite way. I know that some esc has this thing that makes you break the motor and then push stick forward an inch and then back to enter reverse, such a regulator is not usable for my purpose.
Any recomandations for a regulator where size is critical?
|Oct 10, 2012, 12:50 PM|
Joined Jun 2010
You can also set the drag brake, which is how much the car slows down when the stick is in the neutral position, by default it is 0%, but it can be as high as 20%.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||Reprogram a brushless ESC to get a brushed ESC with no delays / RC Switch||kapteinkuk||DIY Electronics||81||Jan 04, 2014 06:29 AM|
|Sold||Align 35A Brushless ESC RCE-BL35X with Governer Mode - New with Seals||737 Driver||Aircraft - Electric - Helis (FS/W)||1||Apr 12, 2012 03:45 PM|
|Sold||Align 35A Brushless ESC RCE-BL35X with Governer Mode - New with Seals||737 Driver||Aircraft - Electric - Power Systems (FS/W)||0||Apr 12, 2012 03:24 PM|
|do i need normal rotation or revers rotation to use with gearbox?||daltrey||Electric Plane Talk||5||Dec 11, 2004 12:21 PM|