|Sep 16, 2002, 09:14 AM|
Joined Feb 2000
Plans for a high wing trainer?
Well, my seven year old is going to ask Santa for his very own electric airplane this year. Rather than go out and buy an overpriced piece of trainer junk I figure I will just build him a high wing trainer. Anyone know of plans for a good high wing R/E trainer? Bigger never hurts either. I am thinking tricycle gear for my boy's first plane.
|Sep 16, 2002, 09:58 AM|
United States, VA, Arlington
Joined Dec 1996
Smart idea. Pat Tritle at:
does a plan for a high wing 3 channel trainer called Vert E go. Taildragger gear, but don't let that frighten you. I've seen one fly and it's a real good, handy model. Decent size, 60" span, needs fairly modest power too. Basic wood structure.
|Sep 16, 2002, 07:18 PM|
I know you said plans but if a kit with good looks and classic lines with a very forgiving attitude would work for you then checck out the SR Batteries Cutie. This plane is so easy to fly that with the throws turned down a notch anyone can fly it. (As demonstrated at the flying field last thursday night. A newbie with no flight time at all flew mine with instruction on the fly so to speak)
|Sep 17, 2002, 03:32 AM|
I don't know if you can get it in the States, but September 'RC Model World' has a free plan for something called 'Tom-E-Boy' which is exactly what you want.
Geared speed 400, say 9x6 prop and 7-8 600-1100 cells and dead easy to build. 3 channel only, but you did say 'trainer'
I knocked up a design for something very similar, and put ailerons on it - waste of time with all that dihedral! Unfortunately the wing wasn't very strong, and eventually folded..and I miss it!
In fact, I must get down to the 'Hobby store' and stock up on lightweight covering, and some LE/TE sections, and make another one.....
To be honest, you don't really NEED a plan, get a stock Speed 400 geared 1.85 or 2.33 :1, 7.2V or 6V (use only 7 cells on 6v) and some APC 9x6E or 10x4.7 sloflys, an 8x600Ae pack, a pair of foamie wheels, some balsa,snakes, servos, piano wire for a UC...and as long as it has
- around 40" span
- weights under 23oz AUW
- 5-10 degrees dihedral
- CofG at about 30% chord
- simple flat bottom wing section
It will both fly, and please!
There is a very nice low volume UK kit, made by Westfield, called the Beguine, which is very similar.
RipMax in the UK do an ARTF vintage called the Zephyr (www.ripmax.com) for speed 600 power.
Then there are the Ben Buckle range of vintage kits, wich electrify well - they do an electric Junior 60 I think.
All these are nice slow lazy models that give you time to light a fag between one end of the field and the other, and fly themselves almost :-)
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Found||Looking for a High wing aileron trainer 4 channel Plane kit..............||mtdoramike||Aircraft - Electric - Airplanes (FS/W)||11||Jun 17, 2007 05:43 PM|
|Question||Plans for 4 ch high wing trainer||meldar9||Foamies (Scratchbuilt)||3||Feb 17, 2007 07:28 PM|
|Discussion||Seeking ideas or plans for high lift wing.||Mr. Pimp||Flying Wings||4||Jan 01, 2007 03:43 PM|
|looking for good plans for a flying wing||doodledap||Scratchbuilt Indoor and Micro Models||3||Aug 08, 2006 10:06 AM|
|Are there plans for a largish Foamie Trainer?||Snitch7||Foamies (Kits)||9||Mar 02, 2003 08:19 AM|